/build/static/layout/Breadcrumb_cap_w.png

ICE Errors and Resolutions

What are Internal Consistency Evaluators (ICEs)?

When I was visiting a customer a while ago, I ran into a software packager wearing a funny t-shirt. I do not remember the name of the company which was promoting their packaging tool with that t-shirt at the time. However, the back of the t-shirt said “Real packagers do it on ICE”. :)

Every software packager involved with Windows Installer possibly knows that it is not easy to do it on ICE, right?

Even though Microsoft created the ICE validation rules to enforce consistency within the MSI database, you may need to deal with many validation errors and warnings which do not have obvious cause or resolution. Whether you deal with a repackaged application as MSI or a vendor-supplied MSI, you may see hundreds of validation errors and warnings. Some errors and warnings can safely be left in packages and others should be resolved.

Internal Consistency Evaluators (ICEs)

Internal consistency evaluators are simply custom actions written in VBScript, JScript, or as a DLL or EXE. When these custom actions are executed, they scan the database for entries in database records that are valid when examined individually but that may cause incorrect behavior in the context of the whole installation database.

ICE custom actions return four kinds of messages.

* Errors: Error messages report database authoring that cause incorrect behavior. Errors may cause run-time problems for the installation database and/or the application which can be installed from the installation database. For example, using the same GUID for two components is not allowed and this will result in an ICE error during validation.

* Warnings: Warning messages report database authoring that causes incorrect behavior in certain cases. Warnings can also report unexpected side-effects of database authoring. For example, entering the same property name in two conditions that differ only by the case of letters in the name. Because the installer is case-sensitive, the installer treats these as different properties.

* Failures: Failure messages report the failure of the ICE custom action. Failure is commonly caused by a database with such severe problems that the ICE cannot even run.

* Informational: Informational messages provide information from the ICE and do not indicate a problem with the database. Often they are information about the ICE itself, such as a brief description. They can also provide progress information as the ICE runs.

The mechanism to do a package validation is fairly simple. To validate a database, you will need to use a special validation tool to merge a .cub file (sometimes called ice cubes) containing the Internal Consistency Evaluators (ICEs) into your database, execute the ICEs, and report the results. You can use “MSI Validation Tool” that comes with MS Platform SDK or use third party utilities like “Wise Package Validation Wizard”.

Authors of installation packages can also write ICE custom actions or use the standard set of ICEs included in the .cub files provided with the SDK. A .CUB file is a special type of database that can also be opened by an MSI editing tool like ORCA (Orca comes with MS Platform SDK).

ICE01

What does ICE01 check?

ICE01 validates that the ICE mechanism is working. It does not test anything. This ICE uses the Time property to get the time and returns either the system time or None.

When does ICE01 show up?

Unless there is a problem with the ICE mechanism, ICE01 should never return an error.

Where can I get more information?

Microsoft Platform SDK - ICE01

ICE02

What does ICE02 check?

ICE02 validates that certain references between the Component, File, and Registry tables are reciprocal. These references must to be reciprocal for the installer to correctly determine the installation state of components.

Key path value used for a component in the Component table must be the primary key of a record in the Registry or File tables depending on the type of key path. In addition, the value used under Component_ column of File or Registry tables must be the primary key of the corresponding record in the Component table. Hence, the references must be reciprocal.

When does ICE02 show up?

ICE02 posts an error message if it finds a reference that is not reciprocal.

How can I fix ICE02?

You will need to modify the record so that the reference can be reciprocal.

Where can I get more information?

Microsoft Platform SDK - ICE02

ICE03

What does ICE03 check?

ICE03 checks the data types and foreign keys based on the _Validation table and the database tables in the .msi file. The _Validation table is a system table that contains the column names and the data types for all of the tables in the database. It is used during the database validation process to ensure that all columns are accounted for and have the correct values.

When does ICE03 show up?

ICE03 typically posts an error if a data value is not permitted based on the data type and table information stored in _Validation Table.

Brief descriptions of the ICE03 errors are listed below:

Duplicate Primary Key

The primary keys of a new row duplicates the primary keys of an existing row. The Nullable column of the _Validation table shows the primary keys in the database.

Not A Nullable Column

A table column that is not specified as nullable in the Nullable column of the _Validation table contains an entry that is Null.

Not A Valid Foreign Key

A column that is a foreign key into a second table contains an entry that does not exist in the primary key of the second table.

Value exceeds MaxValue

The numeric value of an entry in a database table exceeds the maximum limit specified for this field in the MaxValue column of the _Validation table.

Value below MinValue

The numeric value of an entry in a database table is less than the minimum limit specified for this field in the MinValue column of the _Validation table.

Value not a member of the set

The value of an entry in a database table is not a member of the acceptable set of values specified for this field in the Set column of the _Validation table.

Invalid version string

Version number is not an acceptable value. The Version data type is a text string containing a valid version string. A version string has the format xxxxx.xxxxx.xxxxx.xxxxx where x is a digit.

All UPPER case required

Lowercase values are not allowed. The UpperCase data type is a text string that must be all uppercase.

Invalid GUID string

Globally Unique Identifier used is not an acceptable value. The valid format for a GUID is {XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX} where X is a hex digit (0,1,2,3,4,5,6,7,8,9,A,B,C,D,E,F). Note that utilities such as GUIDGEN can generate GUIDs containing lowercase letters. These must all be changed to uppercase letters before the GUID can be used by the installer as a valid product code, package code, or component code.

Invalid file name/usage of wildcards

The database contains an invalid file name or an incorrect wildcard. The WildCardFilename data type is a Filename that may also contain the wild card characters "?" for any single character or "*" for zero or more occurrences of any character. The Filename data type is a text string containing a file name or folder. By default, the file name is assumed to use short file name syntax; that is, eight-character name, period (.), and 3-character extension. To include a long file name with the short file name, separate it from the short file name with a vertical bar (|).

Short and long file names must not contain the following characters:

\ ? | > < : / * "

In addition, short file names must not contain the following characters:

+ , ; = [ ]

No space is allowed preceding the vertical bar (|) separator for the short file name/long file name syntax. Short file names may not include a space, although a long file name may. A space can exist after the separator only if the long file name of the file name begins with the space. No full-path syntax is allowed.

Invalid identifier

The Identifier data type is a text string. Identifiers may contain the ASCII characters A-Z (a-z), digits, underscores (_), or periods (.). However, every identifier must begin with either a letter or an underscore.

Invalid Language Id

The database contains an invalid numeric Language Identifier (LANGID). The Language data type is a text string containing one or more valid numeric language IDs. If there are two or more language IDs, they must be separated by commas.

See the platform SDK for a current list of Language Identifiers used by Windows. For example, 1033 for the U.S. and 0 for language neutral.

Invalid Filename

The Filename data type is a text string containing a file name or folder. By default, the file name is assumed to use short file name syntax; that is, eight-character name, period (.), and 3-character extension. To include a long file name with the short file name, separate it from the short file name with a vertical bar (|).

Short and long file names must not contain the following characters:

\ ? | > < : / * "

In addition, short file names must not contain the following characters:

+ , ; = [ ]

No space is allowed preceding the vertical bar (|) separator for the short file name/long file name syntax. Short file names may not include a space, although a long file name may. A space can exist after the separator only if the long file name of the file name begins with the space. No full-path syntax is allowed.

Invalid full path

Only Path, AnyPath, and Paths data types are allowed. The Path data type is a text string containing a valid full path. The string may also contain a property name enclosed in square brackets [ ]. In such a case, the name of the property, including the brackets, is replaced in the string by the value of the property. The AnyPath data type is a text string containing either a full path or a relative path. When specifying a relative path, you can include a long file name with the short file name by separating the short and long names with a vertical bar (|). Note that you cannot specify multiple levels of a directory or fully qualified paths in this way. The path may contain properties enclosed within square brackets ([ ]). The Paths data type is a text string containing a list of Path data types, separated by semicolons (;).

Bad conditional string

The database contains an invalid conditional string. This is a text string that must evaluate to TRUE or FALSE according to the Conditional Statement Syntax.

Invalid format string

Only Formatted data type is allowed.

The Formatted data type is a text string that is processed to resolve embedded property names, table keys, environment variable references, and other special substrings. The following conventions are recognized to resolve the string

* Square brackets ([ ]) or curly braces ({ }) with no matching pair are left in the text.

* If a substring of the form [propertyname] is encountered, it is replaced by the value of the property. If propertyname is not a valid property name, then the substring resolves as blank.

* The square brackets may be iterated and the property names are resolved from inside out.

* If a substring of the form [%environmentvariable] is found, the value of the environment variable is substituted for the substring.

* If a substring of the form [\x] is found, it is replaced by the character x , where x is one character, without any further processing. Only the first character after the backslash is kept; everything else is removed.

* If a substring is enclosed in curly braces ({ }), and it contains no property names enclosed in square brackets ([ ]), the substring is left unchanged, including the curly braces.

* If a substring is enclosed in curly braces ({ }) and it contains one or more property names enclosed in square brackets ([ ]) then, if all the property names are valid, the text (with the resolved substitutions) is displayed without the curly braces.

* If a substring of the form [~] is found, it is replaced with the null character. This is used to author REG_MULTI_SZ character strings in the Registry table. Note that [~] is also used to append or prefix values to environment variables using the Environment table.

* If a substring of the form [#filekey] is found, it is replaced by the full path of the file, with the value filekey used as a key into the File table. The value of [#filekey] remains blank and is not replaced by a path until the installer runs the CostInitialize action, FileCost action, and CostFinalize action. The value of [#filekey] depends upon the installation state of the component to which the file belongs. If the component is run from the source, the value is the path to the source location of the file. If the component is run locally, the value is the path to the target location of the file after installation. If the component has an action state of absent, the installed state of the component is used to determine the [#filekey] value. If the installed state of the component is also absent or null, [#filekey] resolves to an empty string, otherwise it resolves to the value based upon the component's installed state. For more information about checking the installation state of components, see Checking the Installation of Features, Components, Files.

* If a substring of the form [$componentkey] is found, it is replaced by the install directory of the component, with the value componentkey used as a key into the Component table. The value of [$componentkey] remains blank and is not replaced by a directory until the installer runs the CostInitialize action, FileCost action, and CostFinalize action. The value of [$componentkey] depends upon the installation state of the component and where it occurs. In the Value column of the Registry Table, this substring may refer to the action state or the requested action state of the component. In all other cases, this substring refers to the action state of the component. For example, if the component is run from the source, the value is the source directory of the file. If the component is run locally, the value is the target directory after installation. If the component is absent, the value is left blank. Windows Installer tracks both the action and requested installation states of components.

* Note that if a component is already installed, and is not reinstalled, removed, or moved during the current installation, the action state of the component is null and the string [$componentkey] evaluates to Null.

If a substring of the form [!filekey] is found, it is replaced by the full short path of the file, with the value filekey used as a key into the File table. This syntax is valid only when used in the Value column of the Registry or the IniFile tables. When used in other columns this syntax is treated the same as [#filekey].

Invalid template string

Only Template data type is allowed. The Template data type is a text string that may contain properties that are enclosed in brackets [ ]. The template type allows all of the Formatted type formats, plus [1] where 1 is a number.

Invalid DefaultDir string

Only DefaultDir data type is allowed. The DefaultDir data type is a text string containing either a valid Filename or a valid Identifier. This is used only in the Directory table. It must be an identifier if the directory is a root directory. If the directory is a non-root, this value must be a filename or a filename:filename pair. Note that "." is allowed as a file name and has special meaning in the Directory table.

Invalid registry path

Only RegPath data type is allowed. The RegPath data type is a text string containing a Registry path. Registry paths can include properties, as with the Formatted data type. A RegPath may not begin or end with a backslash (\). The [#file key] and [$component key] can be embedded in the path or preceded by other characters.

Bad CustomSource data

Only CustomSource data type is allowed. The CustomSource data type is either a valid Identifier or an external key depending on the Type column of the CustomAction table. It can be an external key into the Binary table, File table, Directory table, and Property table.

Invalid property string

Only Property data type is allowed. The Property data type is a valid Identifier with the additional syntax "%identifier", which represents an environment variable.

Missing data in _Validation table or old Database

There are columns in the database that are not listed in the Column column of the _Validation table. The database and _Validation table do not match

Bad cabinet syntax/name

Only Cabinet data type is allowed. The Cabinet data type must be used in the Cabinet column of the Media table. If the cabinet name is preceded by the number sign, the cabinet is stored as a data stream inside the package. The character string which follows the # is an Identifier for this data stream. Note that if the cabinet is stored as a data stream, the name of a cabinet is case-sensitive.

_Validation table: Invalid category string

This is an error in authoring the _Validation table. Validation does not recognize the category string used for this particular column in the _Validation table. The following Column Data Types are specified as valid categories: Text, UpperCase, LowerCase, Integer, DoubleInteger, Time/Date, Identifier, Property, Filename, WildCardFilename, Path, Paths, AnyPath, DefaultDir, RegPath, Formatted, Template, Condition, GUID, Version, Language, Binary, CustomSource, Cabinet, Shortcut.

_Validation table: Data in KeyTable column is incorrect

The KeyTable column in the _Validation table references a table that does not exist in the database.

_Validation table: Value in MaxValue column < that in MinValue column

This is an error in authoring the _Validation table. Min must always be less than or equal to Max.

Bad shortcut target

Only Shortcut data type is allowed. The Shortcut data type is usually used in the Target column of the Shortcut table. If it contains square brackets ([ ]), the shortcut target is evaluated as a Formatted string. Otherwise, the shortcut is evaluated as an Identifier and must be a valid foreign key into the Feature table.

String overflow (greater than length permitted in column)

The string's length is greater than the column width specified by the column definition. Note that the installer does not internally limit the column width to the specified value. See Column Definition Format.

Undefined error

Unknown error

Column cannot be localized

Primary key columns cannot be localized.

How can I fix ICE03?

You will need to correct the data found in the specified table based on the data type information stored in _Validation table.

Where can I get more information?

Microsoft Platform SDK - ICE03

ICE04

What does ICE04 check?

ICE04 validates that the sequence number of every file in the File table is less than or equal to the largest sequence number in the LastSequence column of the of the Media table.

When does ICE04 show up?

ICE04 posts an error message if there is a file with a sequence number greater than the largest LastSequence number for the source media.

How can I fix ICE04?

LastSequence column in Media table holds the maximum number allowed for a sequence number of a file. In order to fix this, the largest LastSequence number for the source media needs to be incremented.

Where can I get more information?

Microsoft Platform SDK –ICE04

ICE05

What does ICE05 check?

ICE05 validates that certain database tables contain required entries. The following properties (i.e. Windows Installer variables) have to be present in the Property table of any MSI file: ProductName, ProductLanguage, ProductVersion, ProductCode, and Manufacturer.

When does ICE05 show up?

ICE05 posts an error if a required entry is not found in the database.

How can I fix ICE05?

You will need to add the required entry or entries to your installation database.

Where can I get more information?

Microsoft Platform SDK – ICE05

ICE06

What does ICE06 check?

ICE06 checks every table to validate that all the columns listed in the _Validation table are present in the table. The _Validation table is a system table that contains the column names and the data types for all of the tables in the database. It is used during the database validation process to ensure that all columns are accounted for and have the correct values. If a table does not exist, any _Validation entries for that table are ignored.

When does ICE06 show up?

ICE06 posts an error if it detects instances in which an author tries to use a new _Validation table that reflects a schema change with an old database that has not been updated. ICE06 also detects the reverse case of an old _Validation table being used with an altered database. Essentially, ICE06 will show up when there is a table column defined in the _Validation table that is not listed in the _Columns table.

How can I fix ICE06?

You will need to update your _Validation table or alter your MSI database schema.

Where can I get more information?

Microsoft Platform SDK – ICE06

ICE07

What does ICE07 check?

ICE07 checks to see if the installation package is set to install fonts into the FontsFolder (FontsFolder is a property which gets resolved to the full path of the system Fonts folder.). If a font is installed to a folder other than the FontsFolder the installer creates a shortcut rather than actually installing the font.

When does ICE07 show up?

ICE07 posts an error if the font file is being installed into a folder other than the FontsFolder.

How can I fix ICE07?

You will need to specify your fonts files to be installed into the FontsFolder.

Where can I get more information?

Microsoft Platform SDK – ICE07

ICE08

What does ICE08 check?

ICE08 validates that the Component table contains no duplicate GUIDs (i.e. Globally Unique Identifiers). Every component must have a unique GUID. Components are storage units for application resources. They are also registered on the target system for application maintenance. The only way for Windows Installer to identify which resource belongs to which component is through these unique identifiers. Components should never ever use the same GUID.

When does ICE08 show up?

ICE08 posts an error message if two or more components share the same GUID. Technically that means two or more entries in the ComponentId column of the Component table contain the same GUID.

How can I fix ICE08?

You will need to specify/generate unique GUIDs for each component you have in your installation database.

Where can I get more information?

Microsoft Platform SDK – ICE08

ICE09

What does ICE09 check?

ICE09 checks to see if a file is set to be installed as a permanent resource (to be left on the system during uninstall) under SystemFolder (SystemFolder is the property which gets resolved to the full path of the System folder). Technically, ICE09 validates that the permanent bit is set for every component marked for installation into the SystemFolder.

When does ICE09 show up?

ICE09 posts a warning if a file that is set to be installed under System folder is NOT marked as a permanent resource. Installation authors should avoid installing non-permanent system components to the SystemFolder.

How can I fix ICE09?

To prevent this warning, you should mark your files that are set to be installed under System folder as permanent resources. Technically, you need to set the Permanent bit in the Attributes column of the Component table for every component that is marked for installation into the SystemFolder.

Where can I get more information?

Microsoft Platform SDK – ICE09

ICE10

What does ICE10 check?

ICE10 checks if advertisement is allowed for a child feature whose parent feature supports advertisement. Technically, ICE10 validates that the advertise state of child features matches that of its parent feature. A child feature may not disallow advertisement while its parent feature allows advertisement because it would turn off the parent whenever the parent was supposed to be advertised. However, the reverse is allowed. A child can be marked to favor advertisement while the parent is marked to disallow advertisement.

Note: The Windows Installer can advertise the availability of an application to users or other applications without actually installing the application. If an application is advertised, only the interfaces required for loading and launching the application are presented to the user or other applications. If a user or application activates an advertised interface the installer then proceeds to install the necessary components as described in Installation-On-Demand.

When does ICE10 show up?

ICE10 generates an error if a child feature disallows advertisement while its parent feature allows advertisement. Technically, ICE10 posts an error if the Attributes column of the Feature table contains a mismatch in the advertise state.

How can I fix ICE10?

Child feature should not be set to disallow advertisement, which conflicts with the allow advertisement state of its parent. So, you should either change the feature state of the child or the parent. Note that it is valid to set the state of a feature to 0 and have its parent or child set to favor or disallow advertisement.

Where can I get more information?

Microsoft Platform SDK – ICE10

ICE11

What does ICE11 check?

ICE11 validates that a nested MSI installation custom action has a valid identifier for the source. Technically, ICE11 checks the Source column of the CustomAction table for Nested Installation custom actions. The Source column must contain a valid GUID (MSI product code).

Note: The valid format for a GUID is {XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX} where X is a hex digit (0,1,2,3,4,5,6,7,8,9,A,B,C,D,E,F). Utilities such as GUIDGEN can generate GUIDs containing lowercase letters. These must all be changed to uppercase letters before the GUID can be used by the installer as a valid product code, package code, or component code

When does ICE11 show up?

ICE11 posts an error if the Source column of the CustomAction table is authored incorrectly for nested installation custom actions.

How can I fix ICE11?

The source of a Nested Installation custom action must contain a valid GUID. So, you should update the source value so that it can represent a valid MSI product code.

Where can I get more information?

Microsoft Platform SDK – ICE11

ICE12

What does ICE12 check?

ICE12 checks the following items in your MSI database:

• CostFinalize action occurs in any sequence table containing “Set Directory” (Type 35) or “Set Property” (Type 51) custom actions.

• Every “Set Directory” (Type 35) custom action comes after the CostFinalize action in the sequence tables.

• Every “Set Property” (Type 51) custom action that has a foreign key to the Directory table in the Source column of the CustomAction table comes before the CostFinalize action in the sequence tables.

ICE12 queries the CustomAction, Directory, AdminExecuteSequence, AdminUISequence, AdvtExecuteSequence, InstallExecuteSequence, and InstallUISequence tables for validation.

Note: ICE12 does not validate the formatted text in the Target column of the CustomAction table.

When does ICE12 show up?

ICE12 posts an error message if validation of the custom actions that set a directory property fails.

How can I fix ICE12?

Since ICE12 checks more than one thing, you will need to fix your MSI based on the specific error message returned from ICE12. You may need to do one of the following to fix ICE12:

• Change the custom action entry in the Source column of CustomAction table to an existing entry in the Directory table or add the new directory to the Directory table.

• Change the custom action location in the InstallExecuteSequence table such that it comes after the CostFinalize action.

• Change the custom action location in the InstallExecuteSequence table such that it comes before the CostFinalize action.

Where can I get more information?

Microsoft Platform SDK – ICE12

ICE13

What does ICE13 check?

ICE13 checks if any of your installation user interface dialogs in your MSI database are placed in ExecuteSequence tables. Technically, ICE13 validates that dialogs in sequence tables appear ONLY in the AdminUISequence, or InstallUISequence tables. Dialogs must not be listed in the ExecuteSequence tables (i.e. InstallExecuteSequence, AdminExecuteSequence, and AdvtExecuteSequence tables).

When does ICE13 show up?

ICE13 posts an error message if a dialog is found in an execute sequence table (i.e. InstallExecuteSequence, AdminExecuteSequence, or AdvtExecuteSequence tables).

How can I fix ICE13?

You should either completely remove the specified dialog from the execute sequence or cut & paste it to a UISequence table (i.e. AdminUISequence, or InstallUISequence)

Where can I get more information?

Microsoft Platform SDK – ICE13

ICE14

What does ICE14 check?

ICE14 validates the following:

• Root (top level) features must not have “Follow Parent” attribute set. A root feature does not have a parent.

• No feature can be its own parent.

When does ICE14 show up?

ICE14 posts an error message if it finds a root feature with the “Follow Parent” (i.e., msidbFeatureAttributesFollowParent) bit set or a feature with identical entries in the Feature and Feature_Parent columns of the Feature table.

How can I fix ICE14?

Depending on the ICE14 error details, you will need to do one of the following:

• From your root feature, remove the msidbFeatureAttributesFollowParent bit set in the Attributes column of the Feature table.

• Remove the value found under Feature_Parent column of the Feature table for the feature that has the same entry in the Feature and Feature_Parent columns.

Where can I get more information?

Microsoft Platform SDK – ICE14

ICE15

What does ICE15 check?

ICE15 validates that content type and extension references in the MIME and Extension tables are reciprocal. The MIME table must reference a content type to an extension that the Extension table references back to the same content type. Multiple extensions can reference the same MIME type, as long as the MIME type references back to one of the extensions. Multiple MIME types can reference the same extension, as long as the extension references back to one of the MIME types.

Note: Whenever a MIME references an extension, that extension cannot have the MIME_ column in the Extension table set to Null.

When does ICE15 show up?

ICE15 posts an error if the content type and extension references are not reciprocal.

How can I fix ICE15?

You will need to take a look at ContentType, and Extension_ columns of MIME table as well as Extension, and MIME_ columns of Extension table to find if references are reciprocal.

Note: “_” (i.e. underscore character) used in a column name is an indication of a foreign key (i.e. primary key of another table). Such a column name also gives you an indication about which table it links to. For example, MIME_ column of Extension table is a foreign key that links the table to MIME table where the primary key is ContentType. Hence, you should see the same data under both columns for records that are reciprocal.

Where can I get more information?

Microsoft Platform SDK – ICE15

ICE16

What does ICE16 check?

ICE16 validates that the value of the ProductName property in the Property table is no greater than 63 characters in length.

Note: The installer truncates ProductName values that are 31 to 63 characters in length to 31 characters. A longer name does not show when the registry key for DisplayName is set in the Uninstall for ARP.

When does ICE16 show up?

ICE16 posts an error message if the ProductName set in the Property table is longer than 63 characters.

How can I fix ICE16?

You need to make your Product Name string less than or equal to 63 characters in length.

Where can I get more information?

Microsoft Platform SDK – ICE16

ICE17

What does ICE17 check?

ICE17 checks more than one situation related to the user interface controls used on dialogs (if your setup contains dialogs).

When does ICE17 show up?

ICE17 displays an error or warning message if the following rules are not followed:

• Pushbutton control used on a dialog must have an event defined in the Control Event table. Essentially the idea of using a push button is to trigger an event. A button that is not attached to an event does not provide any value. ICE17 returns error if this rule is not followed.

• Bitmap and/or icon controls used on dialogs must have corresponding bitmaps and/or icons listed in the Binary table. Binary table is used to store binary data such as bitmaps, icons, DLL files, etc. If a bitmap control or an icon control does not have a corresponding data listed in the Binary table, ICE17 returns error.

• Property value used in RadioButton table must be used for the corresponding data under Property column in Control table (if the Indirect bit is not set in Attributes column). ICE17 posts a warning because the installer uses the property's value as a foreign key into the RadioButton table, but the value is missing from the primary key of that table. This warning can be ignored if the control is created at runtime.

• Property value used in ComboBox table must be used for the corresponding data under Property column in Control table (if the Indirect bit is not set in Attributes column). ICE17 posts a warning because the installer uses the property's value as a foreign key into the ComboBox table, but the value is missing from the primary key of that table. This warning can be ignored if the control is created at runtime.

• Property value used in ListView table must be used for the corresponding data under Property column in Control table (if the Indirect bit is not set in Attributes column). ICE17 posts a warning because the installer uses the property's value as a foreign key into the ListView table, but the value is missing from the primary key of that table. This warning can be ignored if the control is created at runtime.

• PushButton or CheckBox controls can display a bitmap or an icon. If that is the case, Text column of the Control table must contain a foreign key into the record of the Binary table containing the bitmap or icon. ICE17 returns error if this rule is not followed.

• RadioButtonGroup control can display a bitmap or an icon. If that is the case, Text column of the RadioButton table must contain a foreign key into the record of the Binary table containing the bitmap or icon. ICE17 returns error if this rule is not followed.

• PushButton, CheckBox, or RadioButtonGroup controls can not have both Icon bit and Bitmap bit set in the Attributes column of the Control table. It is not allowed to set both attributes together. ICE17 returns error if this rule is not followed.

How can I fix ICE17?

Depending on the situations explained above, the necessary modifications should be done for the appropriate record(s) of user interface control tables.

Where can I get more information?

Microsoft Platform SDK – ICE17

ICE18

What does ICE18 check?

ICE18 checks if the installation package specifies an empty directory as the key path of a component that is not listed in the CreateFolder table.

If the KeyPath column of the Component table is Null, this means that directory listed in the Directory_ column is the key path for that component. Because folders created by the installer are deleted when they become empty, this folder must be listed in the CreateFolder table to prevent the installer from attempting to install every time.

When performing a validation ICE18 first checks whether the following are all true:

• The KeyPath column of the Component table contains a Null value.

• That there are no files listed for the component in the File table.

• That there are no files for the component listed in the RemoveFile table and that the value in the DirProperty is the same as the Directory_ column of the Component table.

• That there are no files for the component listed in the DuplicateFile table and that the value in the DestFolder is the same as the Directory_ column of the Component table.

• That there are no files for the component listed in the MoveFile table and that the value in the DestFolder is the same as the Directory_ column of the Component table.

If these are all true then ICE18 validates the following:

• That the Component_ column of the CreateFolder table has the same value as the Component column of the Component table.

• That the Directory_ column of the CreateFolder table has the same value as the Directory_ column of the Component table.

When does ICE18 show up?

ICE18 posts an error message if the installation package specifies a directory as the key path for component that is not listed in the CreateFolder table.

How can I fix ICE18?

Empty directory used as a key path for a component in the installation package must be specified in the CreateFolder table.

Where can I get more information?

Microsoft Platform SDK – ICE18

ICE19

What does ICE19 check?

ICE19 validates that advertised components reference a file in the KeyPath column of the Component table and that an advertised shortcut references a directory in this column.

ICE19 validates that advertised components or shortcuts have a ComponentId. Components in the PublishComponent table, which are not advertised in another table, are only checked to see whether they have a ComponentId.

When does ICE19 show up?

ICE19 posts an error message if the KeyPath column of the Component table does not reference a file in the case of an advertised component or a directory in the case of an advertised shortcut.

ICE19 posts an error message if any advertised components or shortcuts do not have a ComponentId.

How can I fix ICE19?

Depending on the situation, either the KeyPath or ComponentId column of the Component table has to be updated.

Where can I get more information?

Microsoft Platform SDK – ICE19

ICE20

What does ICE20 check?

ICE20 validates the standard dialogs (i.e. FilesInUse, Error, Exit, UserExit, FatalError dialogs) and dialog requirements of an installation package having an authored user interface. Installation packages with an authored user interface have a Dialog table and the LIMITUI property is not set.

When does ICE20 show up?

ICE20 posts an error message if it cannot validate that the standard dialogs and requirements are present in the installation package.

How can I fix ICE20?

If you use commercial MSI setup development tools, standard dialogs should already be part of a base MSI template. In other words, ICE20 should never show up if you create packages based on a base MSI template which contains these standard dialogs.

Where can I get more information?

Microsoft Platform SDK – ICE20

ICE21

What does ICE21 check?

ICE21 validates that every component in the Component table belongs to a feature. FeatureComponents table is checked to verify this mapping.

When does ICE21 show up?

ICE21 posts an error message if the installation package contains a component that does not belong to a feature.

How can I fix ICE21?

Every component in an MSI package must be assigned to a feature. If there are unassigned components, they will never be installed on a target PC. In order to fix ICE21, the component with this error must be assigned to a proper feature in the package. This can be accomplished by creating a record in FeatureComponents table.

Where can I get more information?

Microsoft Platform SDK – ICE21

ICE22

What does ICE22 check?

ICE22 uses the FeatureComponents table to validate the mapping of features and components referenced in the PublishComponent table (PublishComponent table is used for qualified components. A qualified component is a method of single-level indirection, similar to a pointer. Qualified components are primarily used to group components with parallel functionality into categories.).

When does ICE22 show up?

ICE22 posts an error message if the features and components are mapped incorrectly in the PublishComponent table.

How can I fix ICE22?

PublishComponent table needs to be modified to have the correct mapping of features and components referenced in PublishComponent table.

Where can I get more information?

Microsoft Platform SDK – ICE22

ICE23

What does ICE23 check?

ICE23 validates the control tab order for each dialog box. ICE23 verifies that the tab order forms a single, closed, loop that comes back to the initial control. Hence, at run-time if you tab from one control to another in the end you should come back to the control which you started with.

When does ICE23 show up?

ICE23 posts an error message if the tab order of controls does not form a single closed loop in the dialog box.

How can I fix ICE23?

You will need to create a single, closed loop for the tab order. You may need to modify the data under Control_First column of dialog record found in Dialog table or data under Control_next column of control record found in Control table.

Where can I get more information?

Microsoft Platform SDK – ICE23

ICE24

What does ICE24 check?

ICE24 validates the following properties in the Property table:

• That the ProductCode Property is a valid GUID data type. The valid format for a GUID is {XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX} where X is a hex digit (0,1,2,3,4,5,6,7,8,9,A,B,C,D,E,F).

• That the ProductVersion Property is a valid Version data type. The Version data type is a text string containing a valid version string. A version string has the format xxxxx.xxxxx.xxxxx.xxxxx where x is a digit. The maximum acceptable version string is 65535.65535.65535.65535.

• That the ProductLanguage Property is a valid Language data type. The Language data type is a text string containing one or more valid numeric language IDs.

When does ICE24 show up?

ICE24 posts an error message if any of these properties are not in the form of a valid data type.

How can I fix ICE24?

Property value(s) must be modified to follow the data types allowed.

Where can I get more information?

Microsoft Platform SDK – ICE24

ICE25

What does ICE25 check?

ICE25 validates that a .msi file satisfies all of its internal merge module dependencies and exclusions.

When does ICE25 show up?

ICE25 posts an error message if .msi file has previously been merged with an incompatible merge module or if it has not been merged with a necessary merge module.

How can I fix ICE25?

All merge module dependencies indicated in the .msi file's ModuleDependency table must be satisfied by at least one merge module listed in the ModuleSignature table. All excluded merge modules in the ModuleExclusion table must be compatible with the merge modules listed in the ModuleSignature table.

Where can I get more information?

Microsoft Platform SDK – ICE25

ICE26

What does ICE26 check?

ICE26 validates that AdminUISequence, AdminExecuteSequence, InstallUISequence, InstallExecuteSequence tables contain the actions that are required by the table and does not contain any actions disallowed in the table.

When does ICE26 show up?

ICE26 posts an error message if the installation package has a sequence table that lacks a required action or that contains an action that is disallowed for the table.

How can I fix ICE26?

If a required action is missing from the sequence table, you must add the missing action to the indicated sequence table. If an action cannot be in the indicated sequence table, you must remove the action from the sequence table.

Where can I get more information?

Microsoft Platform SDK – ICE26

ICE27

What does ICE27 check?

ICE27 validates the sequence tables (i.e., AdvtExecuteSequence, AdminUISequence, AdminExecuteSequence, InstallUISequence, InstallExecuteSequence tables) of an installation package for valid actions, action sequence restrictions, and organization in Search, Costing, Selection, and Execution sections.

The ICE27 custom action validates the following:

• That the actions listed in the Action column of the sequence tables are standard actions, a custom action listed in the CustomAction table, or a dialog box listed in the Dialog table.

• That actions subject to sequencing restrictions are in the correct relative order to each other in the action sequence. Sequencing restrictions result when one action is dependent on another.

• That actions restricted to a particular section of the sequence are located where they belong.

When does ICE27 show up?

ICE27 posts an error message if there are sequence tables in the package with invalid action sequencing or organization.

How can I fix ICE27?

If there is an unknown action found in a standard table, depending on the action either a custom action must be added to CustomAction table or a dialog box must be listed in the Dialog table.

If there is an action that is in wrong place in the sequence table, you must change the sequence number of the action to place it to the correct location in the sequence.

If there is an action depends on the execution of another action in the sequence, one of the two actions must be re-placed in the action sequence by updating the action sequence number so that the dependent action always gets executed first.

Where can I get more information?

Microsoft Platform SDK – ICE27

ICE28

What does ICE28 check?

ICE28 is commonly used to validate that the ForceReboot action (if used) is placed before or after, and never within, a specific group of actions in the action sequence tables (i.e., AdminUISequence, AdminExecuteSequence, InstallUISequence, InstallExecuteSequence).

When does ICE28 show up?

ICE28 posts an error message if ForceReboot is sequenced within the specified action group.

How can I fix ICE28?

The ForceReboot action must come between InstallInitialize and InstallFinalize in the action sequence of the InstallExecuteSequence table.

The following actions commonly occur together as a group in the action sequence. It is recommended that the ForceReboot action be scheduled to come after this group. If the ForceReboot action is scheduled before the RegisterProduct action, the installer again requires the source of the installation package after the restart. Therefore, the preferred sequence for ForceReboot is immediately following this action sequence.

RegisterProduct

RegisterUser

PublishProduct

PublishFeatures

CreateShortcuts

RegisterMIMEInfo

RegisterExtensionInfo

RegisterClassInfo

RegisterProgIdInfo

Where can I get more information?

Microsoft Platform SDK – ICE28

ICE29

What does ICE29 check?

MSI file is designed as a Win32 OLE structured storage and handling of streams by the Win32 OLE structured storage implementation limits stream names. The installer can compress stream names up to 62 characters in length. Names longer than this are truncated. ICE29 validates that truncated stream names remain unique. Any table having a Binary or Object column is validated.

When does ICE29 show up?

ICE29 posts an error if truncated stream names do not remain unique.

How can I fix ICE29?

You must change the truncated stream name to a unique name to fix this error.

Where can I get more information?

Microsoft Platform SDK – ICE29

ICE30

What does ICE30 check?

ICE30 validates that the installation of components containing the same file never installs the file more than once in the same directory. ICE30 checks both long file names (LFN) and short file names (SFN).

ICE30 can detect file collisions due to directories with the same property in their paths, but does not detect collisions resulting from two properties having the same value due to possible change of a property value at run-time.

When does ICE30 show up?

ICE30 posts an error message for each pair of components that installs the same file to the same directory.

How can I fix ICE30?

Unless two (or more) components have mutually exclusive conditions, they must not install the same file to the same location. Doing so will break the component reference counting system.

In order to fix ICE30, you should either conditionalize both components or make sure that components install the file to different targets.

Where can I get more information?

Microsoft Platform SDK – ICE30

ICE31

What does ICE31 check?

ICE31 checks if the font styles used in controls on dialogs are defined in MSI. It also validates that the DefaultUIFont property refers to a valid font style. The DefaultUIFont property sets the default font style used for controls.

Controls can have a predefined font style. To set the font and font style of a text string, you need to prefix the string of displayed characters with {\style} or {&style}. Where style is an identifier listed in the TextStyle column of the TextStyle table. If neither of these are present, but the DefaultUIFont property is defined as a valid text style, that font will be used.

ICE31 checks the Text column for each control in the Control Table to verifies that a valid entry exist in the TextStyle table.

When does ICE31 show up?

ICE31 posts an error message for undefined styles, style names that are too long, a missing TextStyle table, and style tags with no closing brace.

ICE31 posts a warning if the style tag is not at the beginning of the line, or if a control has multiple style tags

How can I fix ICE31?

If the error is because of an undefined style, a style record has to be entered in TextStyle table.

If the error is due to a long style name, you will need to shorten the name so that it can contain less than 72 characters. A style that is over 72 chars and therefore cannot possibly be a style even if somehow you did manage to get it in the TextStyle table.

If the error is because of the missing TextStyle table, it has to be added to the MSI and then style records have to be added to the table.

If the error is due to a style tag with no closing brace, a closing brace has to be added to the Text column of the control record in Control table.

If ICE31 posts a warning because of a style tag not at the beginning of the line, the tag has to be replaced to the beginning of the line under the Text column of the control record in Control table.

If ICE31 posts a warning due to multiple style tags, only one of the tags have to be left by removing the others from the Text column of the control record in Control table.

Where can I get more information?

Microsoft Platform SDK – ICE31

ICE32

What does ICE32 check?

ICE32 validates that keys and foreign keys in the .msi file are of the same size and column definition types. This ICE custom action makes the comparison using the _Validation table and using the definition types that are returned by MsiViewGetColumnInfo.

When does ICE32 show up?

ICE32 posts errors if the .msi file contains any foreign keys to keys of a different column length or column data type.

How can I fix ICE32?

If the foreign key and key defined differ in size, you should change the data type length to match.

If there is a foreign key and key defined that differ in their definition types, the foreign key and key pairs must be defined so that their data types match.

Note: As long as you use a good MSI template to start with and do not manually add any extra custom tables to the database, you should never see any ICE32 errors.

Where can I get more information?

Microsoft Platform SDK – ICE32

ICE33

What does ICE33 check?

ICE33 validates that the all the entries in the Registry table belong in that table.

Even though Registry table is used to create/edit registry keys on the target machine, it is not the only table used to do this task. Registry keys that register Classes, Filename Extensions, ProgIDs, Shell Verbs, Remote Server AppIDs, MIME types, or Typelibs are considered as special keys because they can be used as advertised entry points to the application. Maximizing the number of advertised entry points to the application increases the chances that the application can trigger self-repair in a situation where the application is expected to fail. Technically entering these special registry keys to Registry table does not create any problems as far as the application functionalities and the setup are concerned. These special keys will still be registered by means of Registry table. However, Windows Installer service will not consider these keys as advertised entry points to the application. Hence, they will not be able to trigger self-repair if needed. Use of Extension, ProgId, Verb, MIME, Class, Typelib and AppId tables provides the extra benefit by maximizing your potential for self-healing.

The other disadvantage of keeping ICE33 warnings in your MSI package is the fact that you will not be able to fully advertise your product if you want to utilize advertising features of Windows Installer. That means, installation-on-demand will be limited to only advertised shortcuts but not other entry points such as file extensions or MIME types. That is because advertising simply puts down the advertised entry points to the target machine and postpones the rest of the installation to a time that the application is somehow triggered by an advertised entry point. If Registry table is used to store those entry points such as file extensions, they will not show up during advertisement. They will only show up when the application is fully installed.

When does ICE33 show up?

ICE33 issues a warning for each Registry table entry that should be moved and suggests the appropriate table. ICE33 posts warnings for any entries that register Classes, Filename Extensions, ProgIDs, Shell Verbs, Remote Server AppIDs, MIME types, or Typelibs.

How can I fix ICE33?

The fix is to move those special registry entries to the table(s) suggested by the warning. However, unless you are very familiar with registry as well as the application, it is not recommended to move them especially in a repackaging situation. Taking such an action without much familiarity with registry and the application can cause more problems with your MSI package.

Extensions, ProgIds, Verbs, and MIME types must be registered through their respective Extension, ProgId, Verb, MIME tables to support advertisement and install-on-demand. Entries in the Registry table are not written to the registry until the component controlling the value is installed to run Locally or to Run From Source. This precludes the advertisement of components registered through the Registry table. It also precludes install-on-demand for any feature or product requiring the component because advertisement is the only way install-on-demand is available through the Windows Shell.

For Windows 2000, COM Classes must be registered through the Class table to advertise CLSID Contexts and for install-on-demand.

Note that the tables available cannot handle all possible COM registration. In these cases an author should enter as much information as possible into to the individual tables and the remaining information into the Registry table. A common authoring error that must be avoided in this case is that of duplicating an entry in both a COM table and in the Registry table.

It is easier to manage registry keys if they are listed in the appropriate tables rather than being mixed together into the Registry tables. The values in the Typelib and AppId tables are registered when the component controlling the value is installed to run Locally or From Source. These tables are provided for the convenience of setup authors.

Where can I get more information?

Microsoft Platform SDK – ICE33

ICE34

What does ICE34 check?

ICE34 validates that each radio button on every RadioButtonGroup Control has a property in the Property column of the RadioButton table that specifies its radio button group. ICE34 validates that this property exists and is set to a default value in the Property table which is equal to one of the group's radio button values in the Value column of the RadioButton table.

A radio button group must have a default for users to be able to select a choice using the TAB key. This is required for proper user accessibility. Property used for a RadioButtonGroup control keeps the selection made by the user.

ICE34 also reports missing tables.

When does ICE34 show up?

ICE34 post an error message if there is a radio button that does not have a property or specifies an invalid property.

How can I fix ICE34?

To fix the errors reported by this ICE34, you need to check the following:

• Every RadioButton control entry without the indirect attribute set has a property listed in the Property column.

• Every such property has at least one corresponding entry in the RadioButton table.

• Every such property is defined in the Property table, with a value that is one of the choices from the RadioButton table.

• Every property referenced in the Property column of a RadioButton control with the indirect attribute set is defined in the Property table.

Where can I get more information?

Microsoft Platform SDK – ICE34

ICE35

What does ICE35 check?

ICE35 validates that components containing compressed files stored in a cabinet file are not set to run from source. With Windows Installer 2.0 or later, this restriction has been removed.

ICE35 queries the Cabinet column of the Media table to determine which files are compressed and stored in a cabinet file. It queries the File table to determine which components contain these files. Finally, it checks the Component table to determine whether the run-from-source bits are set in the Attributes column.

When does ICE35 show up?

ICE35 posts an error message if there is a compressed file stored in a cabinet file belonging to a component which is set to run from source. With Windows Installer 2.0 or later, this is changed from an error to a warning message.

ICE35 posts warning message if there is a compressed file stored in a cabinet file belonging to a component which is set to run locally or from source. This warning message has been removed with Windows Installer 2.0 and later.

How can I fix ICE35?

To fix this error/warning you must change the bit set in the Attributes column of the Component table so that it will be set to run locally, or remove the file from the CAB file.

Where can I get more information?

Microsoft Platform SDK – ICE35

ICE36 What does ICE36 check?

ICE36 checks if the package contains unused icons that reduces the installer performance. ICE36 validates that every icon in the Icon table is listed at least once in the ARPPRODUCTICON property or the Class, ProgId, or Shortcut tables.

During advertisement, the installer installs all the icons listed in the Icon table on the user's computer. Having unused icons in the Icon table does not prevent the installation from running, however it does unnecessarily increase the size of the .msi file and the time and space required to advertise a feature.

When does ICE36 show up?

ICE36 posts a message if there is an icon in the Icon table that is not referenced in the Class, ProgId, or Shortcut tables and if there is no UI provided to create such a reference at run time.

How can I fix ICE36?

If an icon is not referenced in the property or table and there is no UI provided to create a reference at run time, you should remove the icon to achieve better performance.

Where can I get more information?

Microsoft Platform SDK – ICE36

ICE38

What does ICE38 check?

ICE38 validates that every component being installed under the current user's profile also specifies a registry key under the HKEY_CURRENT_USER root in the KeyPath column of the Component table.

In a roaming user profiles scenario where the application is installed for everyone, windows installer must take care of re-installing the user specific resources such as HKCU keys for the new user who did not originally install the application. Since key paths are verified and self healing is initiated (if necessary) when the application is launched through an advertised entry point, the way to get the user specific data back for a new user is to make an HKCU key as the key path of a component that installs the user data.

When does ICE38 show up?

ICE38 posts an error if a component installed under the user's profile does not specify a HKCU registry key.

How can I fix ICE38?

• If a component with a file key path, installs to user profile, it must use a registry key under HKCU as its Key Path, not a file. To fix this error on the component, change the component key path type to registry key path and set the key path to a HKCU key.

• If a component with a key path value set to NULL, installs to user profile, it must use a registry key under HKCU as its Key Path, not NULL. To fix this error on the component, change the component key path type to registry key path and set the key path to a HKCU key.

• If a component with a registry key path value set to a HKLM registry key, installs to user profile, it must use a registry key under HKCU as its Key Path, not a HKLM registry key. To fix this error on the component, set the key path to a HKCU key.

• If a component with a registry key path value set as NULL, installs to user profile, it must use a registry key under HKCU as its Key Path, not NULL. To fix this error on the component, set the key path to a HKCU key.

• If the Registry entry referenced in the KeyPath column of the component was found and lies under the HKCU tree, but the registry entry's Component_ column does not refer back to the same component that listed it as the KeyPath, this means that the registry entry used as the KeyPath of the component would only be created when some other component was installed. To fix this error change the KeyPath value to refer to a registry entry that belongs to the component, or change the registry entry to belong to the component using it as a KeyPath.

Where can I get more information?

Microsoft Platform SDK – ICE38

ICE39

What does ICE39 check?

ICE39 validates the Summary Information Stream of the database.

ICE39 checks the format of the Word Count Summary Property, Page Count Summary Property, Template Summary Property, Revision Number Summary Property, Create Time/Date Summary Property, Last Saved Time/Date Summary Property, and Last Printed Summary Property.

When does ICE39 show up?

If the Word Count Summary Property specifies that the source is compressed, ICE39 posts a warning if any files are also marked as compressed in the Attributes column of the File table.

ICE39 also posts a warning if the properties specified above do not follow the format specified in Windows Installer SDK.

How can I fix ICE39?

If the warning is due to a data format problem, check the specific property explanation and update the value entered as a value based on the property value format.

Where can I get more information?

Microsoft Platform SDK – ICE39

ICE40

What does ICE40 check?

ICE40 does the following miscellaneous validation:

• ICE40 checks if the .msi file is missing the Error table and the Page Count Summary Property is less than or equal to 100. This means that the installer is only capable of displaying numeric error codes to the user at run time. The Error table is only required in packages having a schema that is less than or equal to 100. Windows Installer versions 1.1 and later do not require the package to have an Error table because the error messages can also be retrieved using Msimsg.dll. Packages with a schema greater than 100 cannot be installed by Windows Installer version 1.0.

• ICE40 checks if the REINSTALLMODE property has been overridden.

• ICE40 also checks if the RemoveIniFile table has a Delete Tag entry with no value.

When does ICE40 show up?

• ICE40 posts an error if the .msi file is missing the Error table and the Page Count Summary Property is less than or equal to 100.

• ICE40 posts an error if REINSTALLMODE property is defined in the Property table.

• ICE40 posts an error if there is a Delete Tag action in the in the RemoveIniFile column of the RemoveIniFile table without specifying a tag to delete in the Value column.

How can I fix ICE40?

• If the .msi file is missing the Error table and the Page Count Summary Property is less than or equal to 100, add an Error table to the installation package and author formatting templates in the Message column for error messages.

• If REINSTALLMODE property is defined in the Property table, remove it from the Property table. Defining the REINSTALLMODE property in .msi file can lead to unexpected behavior.

• If there is a Delete Tag action in the in the RemoveIniFile column of the RemoveIniFile table without specifying a tag to delete in the Value column, add a tag to delete in the Value column of RemoveIniFile table for that specific record.

Where can I get more information?

Microsoft Platform SDK – ICE40

ICE41

What does ICE41 check?

ICE41 checks if the package contains any feature that does not contain the component implementing the class object or extension. If the package contains such a feature, the installer does not install the component with the feature and that advertising may not work as expected.

ICE41 validates that the entries in the Class and Extension tables refer to entries in the Component table that implement the class object or extension of the component.

When does ICE41 show up?

ICE41 posts an error if there is a feature that does not contain the component implementing the class object or extension.

How can I fix ICE41?

• If the error is due to an extension, change the entry in the Feature_ column of the Extension table entry to reference a feature that installs the component listed in the Component_ column or change the feature and component associated in the FeatureComponents table.

• If the error is because of a class entry, change the entry in the Feature_ column of the Class table entry to reference a feature that installs component listed in the Component_ column or change the feature and component associated in the FeatureComponents table.

Where can I get more information?

Microsoft Platform SDK – ICE41

ICE42

What does ICE42 check?

ICE42 validates that InProc servers are not linked to EXE files in the Class table. EXE files cannot be InProc servers.

ICE42 also validates that only LocalServer and LocalServer32 classes have arguments and DefInProc values.

When does ICE42 show up?

ICE42 posts an error if there are InProc servers linked to EXE files in the Class table.

How can I fix ICE42?

• If CLSID specified in the Class table is an InProc server, but the implementing component has an EXE as its key path, change the key path file.

• If Context column of the Class table for a CLSID record is set to 'InProcServer32' and the record has an argument under Argument column, remove the argument. Only LocalServer contexts can have arguments.

• If CLSID in context 'InProcServer32' species a default InProc value, remove the DeflnProc value or change the context of the class. Only LocalServer contexts can have default InProc values.

Where can I get more information?

Microsoft Platform SDK – ICE42

ICE43

What does ICE43 check?

ICE43 validates that shortcuts that do not reference a feature as their Target (non-advertised shortcuts) are in components having a HKCU registry entry as their key path.

Leaving ICE43 errors in the package causes non-advertised shortcuts in the problem component to be installed for the first user on the computer ONLY. Users who install the component later do not see the shortcuts because the component appears to the installer as already existing on the computer.

When does ICE43 show up?

ICE43 posts an error message if a non-advertised shortcut is in a component that does not have a HKCU registry entry as its key path.

How can I fix ICE43?

• If a component has non-advertised shortcuts, and its key path is set to a file, reset the key path with a registry key under HKCU.

• If a component has non-advertised shortcuts, and its key path is set to NULL, reset the key path with a registry key under HKCU.

• If a component has non-advertised shortcuts, and its key path is set to a registry key other than keys under HKCU, reset the key path with a registry key under HKCU.

• If a component has non-advertised shortcuts, and its key path is set to a registry key under HKCU but not listed in the Registry table, create the entry in the Registry table.

• If a registry entry is set as the key path for a component, but that registry entry doesn't belong to the same component, the registry entry used as the key path of the component is only created if some other component was installed. To fix this error, change the key path value to refer to a registry entry that belongs to the component or change the registry entry to belong to the component using it as a key path.

Where can I get more information?

Microsoft Platform SDK – ICE43

ICE44

What does ICE44 check?

ICE44 validates that the NewDialog, SpawnDialog, and SpawnWaitDialog ControlEvents reference valid dialog boxes in the Dialog table.

When does ICE44 show up?

ICE44 posts an error message if there is a dialog control event that does not reference a dialog box listed in the Dialog table.

How can I fix ICE44?

If the control event for a control on a dialog is set to NewDialog, or SpawnDialog, or SpawnWaitDialog, the argument must be set to a valid dialog box in the Dialog table.

To fix ICE44, add an argument that is a key in the Dialog Table.

Where can I get more information?

Microsoft Platform SDK – ICE44

ICE45

What does ICE45 check?

ICE45 validates that bit field columns in the database do not set any reserved bits to 1.

Reserved bits provide no functionality in current versions of the installer, but might in future versions. They should be set to 0 to be compatible with future versions of Windows Installer.

When does ICE45 show up?

ICE45 posts an error message if any of the following tables contains a bit field with a reserved bit set to a value of 1.

• BBControl table

• Dialog table

• Feature table

• File table

• MoveFile table

• ModuleConfiguration table

• ODBCDataSource table

• Patch table

• RemoveFile table

• ServiceControl table

• ServiceInstall table

• TextStyle table

ICE45 posts one of two warning messages if the Control Table contains a bit field with a reserved bit set to a value of 1.

How can I fix ICE45?

To avoid ICE45, do not set any reserved bits to 1 for bit field columns in the database.

Where can I get more information?

Microsoft Platform SDK – ICE45

ICE46

What does ICE46 check?

ICE46 checks for custom properties in conditions, formatted text, and other locations that differ from a system defined property only by the case of one or more characters.

Note: Property names are case sensitive.

When does ICE46 show up?

ICE46 posts an informational message if there is a custom property in a condition, formatted text, and other location that differs from a system defined properties only in the case of one or more characters.

How can I fix ICE46?

If you receive ICE46, verify that those two properties mentioned in the informational message are NOT the same. Since properties are case sensitive, a property name with lower case characters is different than the same property name with upper case characters (even if the difference is only one character being upper case or lower case).

Where can I get more information?

Microsoft Platform SDK – ICE46

ICE47

What does ICE47 check?

ICE47 checks the Feature and FeatureComponents tables for features with 1600 or more components.

When does ICE47 show up?

ICE47 posts an error message if a feature exceeds the maximum limit of 1600 components per feature on Windows NT, Windows 2000, Windows XP and 800 components per feature on Windows 95, Windows 98, Windows Millennium Edition (Windows Me).

How can I fix ICE47?

To fix this warning, try splitting the feature into several features.

Where can I get more information?

Microsoft Platform SDK – ICE47

ICE48

What does ICE48 check?

ICE48 checks for directories that are hard-coded to local paths in the Property table.

When does ICE48 show up?

ICE48 posts an error message if there is a directory that is hard-coded to a local path in the Property table.

How can I fix ICE48?

Do NOT hard-code directory paths to local drives because computers differ in the setup of the local drive. This practice may be acceptable if deploying an application to a large number of computers on which the relevant portions of the drives are all the same.

Where can I get more information?

Microsoft Platform SDK – ICE48

ICE49

What does ICE49 check?

ICE49 checks for default registry entries that are not a REG_SZ type.

When does ICE49 show up?

ICE49 posts an error if there is a default registry entry that is not a REG_SZ type.

On Windows 95 computers, default registry entries (those with no name) can only be REG_SZ values. On Windows 98 and Windows NT/Windows 2000 systems, default values can be of any type. Components with non-REG_SZ default values are valid, as long as they are never installed on a Win95 computer. If they are, an error is generated at install time.

How can I fix ICE49?

To fix this error, make installation of the component conditional upon the target not being a Windows 95 computer, or change the value to type REG_SZ.

Where can I get more information?

Microsoft Platform SDK – ICE49

ICE50

What does ICE50 check?

ICE50 checks that shortcut icons are specified to display correctly and match their target file's extension.

When does ICE50 show up?

ICE50 posts an error message if the extension of the icon and target files do not match. ICE50 posts a warning if icons are stored in files that do not have an .exe or .ico extension.

How can I fix ICE50?

• If the extensions of the icon and the target file do not match, the shortcut will not have the correct context menu when the component is advertised. To fix this error, rename the icon to match the extension of the target file.

• Some versions of the shell incorrectly display icons stored in files that do not have extensions of "exe" or "ico". To fix this warning, rename the icon have an extension of "exe" or "ico".

Where can I get more information?

Microsoft Platform SDK – ICE50

ICE51

What does ICE51 check?

ICE51 checks for TTC/TTF fonts that have titles and other fonts that are missing titles.

When does ICE51 show up?

ICE51 posts an error or warning if there are any TTC/TTF fonts with titles or other fonts missing titles.

How can I fix ICE51?

You must specify a title for fonts that do not have embedded names.

TTF/TTC fonts have the title of the font embedded in the file itself. Do not specify a title for these fonts because the font is then registered twice, once under the supplied name and again under the embedded name.

Where can I get more information?

Microsoft Platform SDK – ICE51

ICE52

What does ICE52 check?

ICE52 checks for private properties in the AppSearch table.

The AppSearch table contains properties needed to search for a file having a particular file signature. The AppSearch table can also be used to set a property to the existing value of a registry or .ini file entry.

When using Windows 2000 all properties set in the Property column of the AppSearch table must be public properties.

Note: Private property names must include lowercase letters. However, public property names cannot contain lowercase letters.

When does ICE52 show up?

ICE52 posts a warning if there is a private property in the AppSearch table.

How can I fix ICE52?

To fix this warning change the private property found in the AppSearch table to a custom public property.

Where can I get more information?

Microsoft Platform SDK – ICE52

ICE53

What does ICE53 check?

ICE53 checks for entries in the Registry table that write private installer information or policy values to the system registry.

When does ICE53 show up?

ICE53 posts a warning if the Registry table specifies writing internal or policy information to the registry.

How can I fix ICE53?

The package should not specify any system policy value in the registry. System policies should be configured without an installer package.

Note: Windows Installer specific system policy values can be found under HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Installer

Where can I get more information?

Microsoft Platform SDK – ICE53

ICE54

What does ICE54 check?

ICE54 checks for components that use a companion file as their key path.

When does ICE54 show up?

ICE54 posts a warning if any component has a key path file that derives its version from another file.

How can I fix ICE54?

The key path file of a component must not derive its version from a different file. This can cause some files to fail to install. To fix this warning, change the key path of the component to another file whose version is not derived from a different file and found in the same component.

Note: For companion files, the Version field of the File table can be set to contain the primary key of another record in the File table. The referenced file then determines the versioning logic for this file.

Where can I get more information?

Microsoft Platform SDK – ICE54

ICE55

What does ICE55 check?

ICE55 validates that all LockPermission objects exist and have valid permission values.

Note: The LockPermissions table is used to secure individual portions of your application in a locked-down environment. It can be used to set permissions on installation of files, registry keys, and created folders for specific users/groups.

When does ICE55 show up?

ICE55 post an error if a LockObject listed in the LockPermissions table does not exist or if no privilege level is specified in the Permission column.

How can I fix ICE55?

• If there is an object record in the LockPermission without a permission value, specify a numeric value in Permission column. If no privileges are needed for this object then you should remove the row.

• If an object described in the LockPermissions table is not listed in the appropriate table (i.e., File, Registry, CreateFolder), refer to a valid object.

Where can I get more information?

Microsoft Platform SDK – ICE55

ICE56

What does ICE56 check?

ICE56 validates that the directory structure of the .msi file has a single root directory, that the root is the TARGETDIR property, and that the SourceDir property value is in the DefaultDir column of the Directory table.

If a .msi file has multiple roots or specifies a root other than TARGETDIR, an administrative installation does not create a correct administrative image.

Note: Empty directories are not checked by ICE56. The directory structure passes validation with multiple root directories if the extra directories are empty.

When does ICE56 show up?

ICE56 posts an error if the .msi does not have a single root, TARGETDIR, or if SourceDir is not specified in the DefaultDir column of the Directory table.

How can I fix ICE56?

• If directory TARGETDIR has a bad DefaultDir value, change the DefaultDir value to “SourceDir” or “SOURCEDIR”. It may be possible to make TARGETDIR the parent of the second root, and use the '.' value in the DefaultDir column.

• If there is a root directory other than TARGETDIR set to “SourceDir” or “SOURCEDIR”, remove the second root directory. The Directory structure should have only one root called TARGETDIR.

Where can I get more information?

Microsoft Platform SDK – ICE56

ICE57

What does ICE57 check?

ICE57 validates that individual components do not mix per-machine and per-user data. This ICE custom action checks registry entries, files, directory key paths, and non-advertised shortcuts.

Mixing per-user and per-machine data in the same component could result in only partial installation of the component for some users in a multi-user environment. For example, after the installation for everyone on the same machine, a new user may not be able to get per-user data due to the poor design of components. This can lead to application run-time problems.

When does ICE57 show up?

ICE57 posts an error if it finds any component that contains both a per-machine and per-user registry entries, files, directory key paths, or non-advertised shortcuts.

How can I fix ICE57?

To fix ICE57 errors, reorganize the application such that each component contains only per-user or per-machine resources, and not both.

Where can I get more information?

Microsoft Platform SDK – ICE57

ICE58

What does ICE58 check?

ICE58 checks that your Media table does not have more than 80 rows.

When does ICE58 show up?

ICE58 posts a warning if the package contains more than 80 rows in the Media table and the package's Page Count Summary Property is less than 150.

Warnings reported by ICE58 cause the installation to FAIL unless the package is installed with Windows Installer version 2.0 or later. Beginning with Windows Installer version 2.0, the restriction to more than 80 media table entries is removed. No warning is issued if the package's Page Count Summary Property is greater than or equal to 150. Packages of schema 200 or higher can only be installed by Windows Installer version 2.0 or later.

How can I fix ICE58?

To fix this error, eliminate any unused media table entries, consolidate media table entries that refer to the same media, and repackage your application to reduce the media required.

Note: If the target machines are known to have Windows Installer version 2.0 or later, ICE58 can be safely ignored.

Where can I get more information?

Microsoft Platform SDK – ICE58

ICE59

What does ICE59 check?

ICE59 checks that advertised shortcuts belong to components that are installed by the target feature of the shortcut.

Target of an advertised shortcut must point to a valid feature and the component it refers to must be part of the target feature.

Errors reported by ICE59 generally lead to the following behavior:

The advertised shortcut will launch the Windows Installer to install the feature listed in the Target column. But because the FeatureComponents table does not map the target feature to the component containing the shortcut, the keyfile of the component (which is activated by the shortcut) is not installed. Therefore the shortcut is broken and will not do anything.

When does ICE59 show up?

ICE59 posts an error if an advertised shortcut does not belong to the components that are installed by the target feature of the shortcut.

How can I fix ICE59?

If there is no mapping between the target feature of an advertised shortcut and the component it refers to (in the FeatureComponents table), add a row to the FeatureComponents table so that target feature of the advertised shortcut is associated with the component that advertised shortcut belongs.

Where can I get more information?

Microsoft Platform SDK – ICE59

ICE60

What does ICE60 check?

ICE60 checks that files in the File table meet the following condition:

• If the file is not a font and has a version, then it must have a language.

• ICE60 checks that no versioned files are listed in the MsiFileHash table.

Failure to fix a warning reported by ICE60 generally leads to a file being needlessly reinstalled when a product repair is done. This happens because the file to be installed in the repair and the existing file on disk have the same version (they are the same file) but different languages. The file table lists the language as null, but the file itself has a language value in the resource. Based on the file versioning rules, the installer favors the file to be installed, so it is recopied needlessly.

When does ICE60 show up?

• ICE60 posts a warning or an error if a file in the File table that is not a font and has a version, does not have a language.

• ICE60 posts an error if a file listed in the MsiFileHash table is versioned.

How can I fix ICE60?

• If ICE60 shows up due to a missing language code, add a language to the file in the File table. Files should have language values stored in the version resource whenever possible. If a file is language neutral, use the LANGID 0.

• If a versioned file is listed in the MsiFileHash table, remove the record from the table.

Where can I get more information?

Microsoft Platform SDK – ICE60

ICE61

What does ICE61 check?

ICE61 checks the upgrade table to ensure that the following conditions are true:

• All ActionProperty properties are not pre-authored in the Property table.

• All ActionProperty properties are Public Properties.

• All ActionProperty properties are included in the SecureCustomProperties property (i.e., they are restricted public properties).

• All ActionProperty properties are unique to each record in the Upgrade table.

• All VersionMax values are not less than the corresponding VersionMin values.

• No attempt is made to remove a newer or equal version of the current product.

Failure to fix a warning or error reported by ICE61 generally leads to problems in upgrading your application. Depending on the exact error, this could be anything from leaving files from the older version behind, deleting files from the older version even though they are needed by the new application, or complete failure of the upgrade.

When does ICE61 show up?

ICE61 posts a warning or error if any of the above conditions are not true.

How can I fix ICE61?

• If the VersionMax value in the Upgrade table is NOT less than the product version in the Property table (i.e., ProductVersion), the installer will try to remove the product of the same version or higher. To fix this error, use a version in the VersionMax column lower than the current version specified in the Property table. Remove the “Include maximum version” option if Maximum Version is equal to the current version. If the intent is only to detect the product and not remove it, specifying “Detect Only” will also fix this error.

• If the ActionProperty is not listed in the SecureCustomProperties property, the property is not passed to the server side of the install when the property is found. To fix this error, add the property to SecureCustomProperties (i.e., make it a restricted public property).

• If the ActionProperty contains lowercase letters, edit the property name to have all uppercase letters. Upgrade properties must be public properties for the result to be passed to the server side of the installation.

• If the same ActionProperty is used for more than one record of the Upgrade table, use a different property for the second record. A property can only be used in one row of the Upgrade table.

• If Upgrade.VersionMax is less than Upgrade.VersionMin, update the VersionMax value to be higher than VersionMin. The minimum version must be less than the maximum version.

Where can I get more information?

Microsoft Platform SDK – ICE61

ICE62

What does ICE62 check?

ICE62 performs extensive checks on the IsolatedComponent table for data that may cause unexpected behavior.

IsolatedComponents table is used to specify that the installer copy the shared files (commonly shared DLLs) of an application into that application's folder rather than to a shared location. This private set of files (DLLs) are then used only by the application. Isolating the application together with its shared components in this manner has the following advantages:

• The application always uses the versions of the shared files with which it was deployed.

• Installing the application does not overwrite other versions of the shared files by other applications.

• Subsequent installations of other applications using different versions of the shared files cannot overwrite the files used by this application.

Failure to fix an error reported by ICE62 can result in a failure of the isolated component system in a wide variety of ways. For example, if the shared DLL reference counter is not incremented for a shared component, the registration for the component could be removed when another application uses that ComponentId and is uninstalled.

When does ICE62 show up?

ICE62 posts a warning or error when it finds data in the IsolatedComponent table that may produce unexpected behavior.

How can I fix ICE62?

• If an isolated application component does not have a file key path, use a different component as the application for the isolated component. An isolated application component must provide a valid executable path to use to isolate the component.

• If an isolated shared component is not set to increment shared DLL reference counter, update the component to increment the shared DLL counter. Not solving this problem can result in the lifetime of the component being incorrect. If another application uses this component (isolated or not) and is uninstalled, the registration for the component is removed but this application's isolated copy remains. This causes repair and uninstall problems.

• If an isolated shared component contains a condition that may be evaluated too FALSE during the lifetime of an installation on a computer, the isolated component could be orphaned without registration information. To fix this warning, remove the condition, or author the condition so that it can never change from TRUE to FALSE.

• If an isolated shared component is shared by two or more components that belong to different features and are installed to the same directory, install the components to different directories or check whether some of the components truly require an isolated component.

• If a feature containing one of the application components is removed the shared component is removed as well. This causes the other feature having application components to lose the isolated component.

Where can I get more information?

Microsoft Platform SDK – ICE62

ICE63

What does ICE63 check?

ICE63 checks for proper sequencing of the RemoveExistingProducts action.

Note: The RemoveExistingProducts action goes through the product codes listed in the Upgrade column of the Upgrade table and removes the products in sequence by invoking nested installations. For each nested installation the installer sets the ProductCode property to the product code and sets the REMOVE property to the value in the Remove field of the Upgrade table. If the Remove field is blank, its value defaults to ALL and the installer removes the entire product.

The RemoveExistingProducts action has sequence restrictions and may be placed:

• Between InstallValidate and InstallInitialize

• Immediately after InstallInitialize, or after InstallInitialize if the actions between InstallInitialize and RemoveExistingProducts do not generate any script actions.

• Immediately after InstallExecute or InstallExecuteAgain and before InstallFinalize (the same restriction as above applies).

• After InstallFinalize.

Failure to fix a warning or error reported by ICE63 leads to failure of the upgrade.

When does ICE63 show up?

ICE63 posts a warning or error if the sequencing of the RemoveExistingProducts action is not correct.

How can I fix ICE63?

To fix ICE63, verify resequence the actions based on sequence restrictions of RemoveExistingProducts action.

Where can I get more information?

Microsoft Platform SDK – ICE63

ICE64

What does ICE64 check?

ICE64 checks that new directories in the user profile are removed correctly in roaming scenarios.

Failure to fix a warning or error reported by ICE64 generally leads to problems in completely cleaning the computer during an uninstallation. When a roaming user who has installed the application logs on to a computer for the first time, all of the profile is copied down onto the computer. On advertisement (which takes place after the roaming profile download), the Installer verifies that the directory is already there and therefore does not delete it on uninstallation. This leaves the directory on the user's computer permanently.

When does ICE64 show up?

ICE64 posts a warning or an error in a roaming situation if a new directory in the user profile that should be removed is not removed.

How can I fix ICE64?

To fix ICE64, you must explicitly specify installer to remove the directory in the user profile folder by creating a row for the folder in the RemoveFile table.

Note: ICE64 can be a problem only if advertisement is used. If the application is not going to be advertised but fully installed by Windows Installer, it can be ignored.

Where can I get more information?

Microsoft Platform SDK – ICE64

ICE65

What does ICE65 check?

ICE65 checks that the Environment table does not have invalid prefix or append values.

Note: The Environment table is used to set the values of environment variables.

Failure to fix a warning or error reported by ICE65 generally leads to problems in install, uninstall, or repair of the environment variable. For example, only some values of a particular variable may be removed if one or more of the values for that variable have a trailing separator.

The following is the list of valid prefixes for environment variable names:

• “=” Create the environment variable if it does not exist, and then set it during installation. If the environment variable exists, set it during the installation.

• “+” Create the environment variable if it does not exist, then set it during installation. This has no effect on the value of the environment variable if it already exists.

• “-“ Remove the environment variable when the component is removed. This symbol can be combined with any prefix.

• “!” Remove the environment variable during an installation. The installer only removes an environment variable during an installation if the name and value of the variable match the entries in the Name and Value fields of the Environment table. If you want to remove an environment variable, regardless of its value, use the '!' syntax, and leave the Value field empty.

• “*” This prefix is used with Microsoft Windows NT/Windows 2000 to indicate that the name refers to a system environment variable. If no asterisk is present, the installer writes the variable to the user's environment. Microsoft Windows 95/98 ignores the asterisk and add the environment variable to autoexec.bat. This symbol can be combined with any prefix. A package that is used for per-machine installations should write environment variables to the machine's environment by including * in the Name column. For more information, see Remarks.

• “=-“ The environment variable is set on install and removed on uninstall. This is the usual behavior.

• “!-“ Removes an environment variable during an install or uninstall.

Value column in the Environment table is used to append values to existing environment variables if necessary.

• To append a value to the end of an existing variable, prefix the string in this field by the Null character [~] and the separator character. For example, if the semicolon is the chosen separator: [~];Value.

• To prefix a value to the front of an existing variable, append the string in this field by the separator character and the Null character [~]. For example, if the semicolon is the chosen separator: Value;[~] .

• If no [~] is present in the field, the string represents the entire value to be set or deleted.

• Each row can contain only one value. For example, the entry Value;Value;[~] is more than one value and should not be used because it causes unpredictable results. The entry Value;[~] is just one value.

• If Name is prefixed with +, then [~] must not be used in Value column. This is because the meaning of "+" and "[~]" are clearly exclusive of one another.

When does ICE65 show up?

ICE65 posts a warning or an error if the environment table has invalid prefix or append values.

How can I fix ICE65?

To fix ICE65, use valid prefix and/or append values based on Environment table guidelines mentioned above.

Where can I get more information?

Microsoft Platform SDK – ICE65

ICE66

What does ICE66 check?

ICE66 uses the tables in the database to determine which schema your database should use.

When does ICE66 show up?

ICE66 posts a warning if your database is using the wrong schema.

How can I fix ICE66?

Some functionalities of installer package may only be available if the package is installed on a system with a specific version of Windows Installer. If you would like to make your package compatible with older versions of Windows Installer, you must make sure that the new functionalities provided only in the later versions of installer are not used in your package. Otherwise, you may miss some functionality of your package that are executed on windows platforms with older versions of Windows Installer. Set your Page Count Summary property accordingly.

Where can I get more information?

Microsoft Platform SDK – ICE66

ICE67

What does ICE67 check?

ICE67 checks that the target of a non-advertised shortcut belongs to the same component as the shortcut itself, or that the attributes of the target component ensure that it does not change installation locations.

Failure to fix a warning or error reported by ICE67 can cause the shortcut to be invalid if the target component changes state and the source component does not. For example, when the target file's component is set to run from source, a reinstallation that changes the component to local results in the component containing the shortcut not being reinstalled. Thus the shortcut points to an invalid location.

When does ICE67 show up?

ICE67 returns an error or a warning if the target of a non-advertised shortcut does not belong to the same component as the shortcut itself, or if the attributes of the target component do not ensure that the installation locations will not change.

How can I fix ICE67?

To fix ICE67, install the non-advertised shortcut as part of the component containing the target file or mark the component with the target file to be installed locally only or run-from-source only but NOT optional.

Where can I get more information?

Microsoft Platform SDK – ICE67

ICE68

What does ICE68 check?

ICE68 checks that all custom action types needed for an installation are valid.

Failure to fix the error reported by ICE68 causes an installation that attempts to execute the action to fail.

ICE68 issues a warning if the action is set to run in system context without specifying it as a deferred execution custom action.

When does ICE68 show up?

ICE68 returns an error if an action type needed for an installation is invalid.

How can I fix ICE68?

• If ICE68 shows up due to a custom action marked to run with elevated privileges but not specified as deferred, you must set the action to be deferred. Otherwise, the custom action will execute under user context.

• If ICE68 shows up because of an invalid custom action type, choose a valid custom action type for the action.

Where can I get more information?

Microsoft Platform SDK – ICE68

ICE69

What does ICE69 check?

ICE69 checks that all substrings of the form [$componentkey] within a formatted string do not cross-reference components. A cross-component reference occurs when the [$componentkey] property of a formatted string refers to a component other than the component stored in the Component_ column of your tables.

Note: If a substring of the form [$componentkey] within a formatted string is found, it is replaced by the install directory of the component. If a component cross-references to another and both components do not belong to the same feature or contain different conditions, it is possible that they may not be installed at the same time causing such a substring above to be evaluated to NULL value. Such missing information may lead to application run-time problems.

When does ICE69 show up?

• ICE69 returns an error if a [$componentkey] substring within a formatted string cross-references a component in another feature.

• ICE69 returns a warning if a [$componentkey] substring within a formatted string cross-references a component in the same feature. (The FeatureComponents table is used to determine this mapping. It must map to the same feature for the warning. Referencing components in parent features or referencing components in child features is considered to be an error.)

• ICE69 reports an error if the [#FileKey] substring within a formatted string references a file that is not present in the File table.

How can I fix ICE69?

To fix this error, do not cross-reference components. You must change the [$componentkey] to match its own component instead of another component.

Where can I get more information?

Microsoft Platform SDK – ICE69

ICE70

What does ICE70 check?

ICE70 verifies that integer values for registry entries are specified correctly. Values of the form ##str, #%unexpanded str are not validated. Values of the form #xhex, #Xhex, #integer, and #[property] are validated. ICE70 checks for valid hex characters (0-9,a-f,A-F). and for valid numeric characters (0-9).

When does ICE70 show up?

ICE70 reports an error if integer and/or hex values for registry entries are not specified correctly.

How can I fix ICE70?

To fix ICE70, use valid values for numeric and/or hex values for registry entries.

Where can I get more information?

Microsoft Platform SDK – ICE70

ICE71

What does ICE71 check?

ICE71 verifies that the Media table contains an entry with DiskId equal to 1. (Windows Installer assumes that the .msi package is on disk 1.)

When does ICE71 show up?

ICE71 returns an error if the Media table does not contain an entry with DiskId equal to 1.

How can I fix ICE71?

To fix this error, change the DiskId of the entry where the package is stored to 1.

Where can I get more information?

Microsoft Platform SDK – ICE71

ICE72

What does ICE72 check?

ICE72 verifies that non-built-in custom actions are not used in the AdvtExecuteSequence table. Specifically, only type 19 (i.e., Cancel Installation), type 35 (i.e., Set Directory), and type 51 (i.e., Set Property) custom actions are allowed in the AdvtExecuteSequence table. If other custom actions are used, advertisement may not behave as expected.

Note: AdvtExecuteSequence is used when application is advertised.

When does ICE72 show up?

ICE72 returns an error if the AdvExecuteSequence table uses custom actions other than type 35, type 51, and type 19.

How can I fix ICE72?

To fix the error, remove custom actions other than type 35, type 51, and type 19 from the AdvtExecuteSequence table.

Where can I get more information?

Microsoft Platform SDK – ICE72

ICE73

What does ICE73 check?

ICE73 verifies that your package does not reuse package codes, upgrade codes, or product codes of the Windows Installer SDK samples. Packages should never reuse the package, upgrade, or product codes of another product.

When does ICE73 show up?

ICE73 outputs a warning if your product's package reuses a package or product code of a Windows Installer SDK sample.

How can I fix ICE73?

To fix ICE73 errors, generate a new unique GUID for your package's product, package and upgrade codes.

Where can I get more information?

Microsoft Platform SDK – ICE73

ICE74

What does ICE74 check?

ICE74 verifies that the FASTOEM property has not been authored into the Property table.

The FASTOEM property enables OEMs to reduce the time required to install Windows Installer applications for the first time. It cannot be used after the first install. The FASTOEM property must not be authored in the Property table because this interferes with subsequent installations for the maintenance, removal, or repair of the application.

ICE74 also verifies that the UpgradeCode property is authored into the Property table, and that its value is not a null GUID, {00000000-0000-0000-0000-000000000000}.

When does ICE74 show up?

• ICE74 posts error if the FASTOEM property has been set in the Property table.

• ICE74 also posts error if UpgradeCode is not found in the Property table or set to a NULL GUID.

How can I fix ICE74?

• If FASTOEM property is found in the Property table and you did not intentionally put it there, remove it from the Property table.

• If UpgradeCode is not found in the Property table, specify an UpgradeCode for the application.

Where can I get more information?

Microsoft Platform SDK – ICE74

ICE75

What does ICE75 check?

ICE75 verifies that all Custom Action Type 17 (DLL), Custom Action Type 18 (EXE), Custom Action type 21 (JScript), and Custom Action Type 22 (VBScript) custom actions are sequenced after the CostFinalize action. These types of custom action use an installed file as their source. ICE75 checks the InstallUISequence Table, InstallExecuteSequence Table, AdminUISequence Table, and AdminExecuteSequence Table.

Note: CostFinalize action is required in InstallUISequence, InstallExecuteSequence, AdminUISequence, and AdminExecuteSequence tables.

This ICE75 custom action is only available for Windows Installer version 2.0 or later.

When does ICE75 show up?

ICE75 posts an error if it finds a custom action using an installed file as a source file that is not sequenced after the CostFinalize action.

How can I fix ICE75?

To fix ICE75 errors, sequence the custom actions after the CostFinalize action.

Where can I get more information?

Microsoft Platform SDK – ICE75

ICE76

What does ICE76 check?

ICE76 verifies the use of the SFP (i.e., System File Protection or WFP - Windows File Protection) catalog within Windows Installer packages for Windows Me.

ICE76 also verifies that no files in the BindImage table reference SFP catalogs.

Note: The BindImage table contains information about each executable or DLL that needs to be bound to the DLLs imported by it.

Windows File Protection requires an exact match between the file and the signature embedded in the catalog file. Files that reference a SFP catalog must not be listed in the BindImage table because the effect of the BindImage action on these files differs between computers. Files referenced by SFP catalogs must be in components that are permanent or installed locally.

When does ICE76 show up?

ICE76 posts an error for each file in the BindImage table that is also in the FileSFPCatalog table.

ICE76 outputs an error if a file in the FileSFPCatalog table belongs to a component with any of the following true:

• Component is set to be removed during uninstall (i.e., component is not permanent).

• Component is set to run from source.

• Component is et to run locally or from source.

How can I fix ICE76?

If a file references a SFP catalog, it can not be in the BindImage table. To fix ICE76, do not enter any files that reference SFP catalogs into the BindImage table.

Where can I get more information?

Microsoft Platform SDK – ICE76

ICE77

What does ICE77 check?

ICE77 verifies that deferred custom actions are sequenced after the InstallInitialize action and before the InstallFinalize action. ICE77 checks the sequence in the InstallExecuteSequence table and AdminExecuteSequence table.

When does ICE77 show up?

• ICE77 posts an error if an in-script custom action is sequenced before the InstallInitialize action or after the InstallFinalize action.

• ICE77 posts an error if the InstallInitialize action or the InstallFinalize action is missing.

How can I fix ICE77?

To fix ICE77 errors, sequence the in-script (deferred) custom actions after the InstallInitialize action and before the InstallFinalize action. The InstallInitialize and InstallFinalize actions must be present in the InstallExecuteSequence table and the AdminExecuteSequence table.

Where can I get more information?

Microsoft Platform SDK – ICE77

ICE78

What does ICE78 check?

ICE78 verifies that the AdvtUISequence table either does not exist or is empty. This is required because no user interface is allowed during advertising.

When does ICE78 show up?

ICE78 posts an error if the AdvtUISequence table exists and is not empty.

How can I fix ICE78?

To fix ICE78 error, either remove the action from the AdvtUISequence table, or remove the AdvtUISequence table from the package.

Where can I get more information?

Microsoft Platform SDK – ICE78

ICE79

What does ICE79 check?

ICE79 validates the references to components and features entered in the database fields using the Condition data type.

Note: The Condition data type is a text string containing a valid conditional statement that can be evaluated as true or false.

When does ICE79 show up?

• ICE79 posts warning if _Validation table is missing in the installation database.

• ICE79 also posts warning if there is an error retrieving value from a column in a table.

• ICE79 posts error if an invalid component reference is found.

• ICE79 also posts error if an invalid feature reference is found.

How can I fix ICE79?

• To fix ICE79 error, enter valid records for conditions of feature and conditions in the Feature and the Condition table.

• To fix ICE79 warning, add the _Validation table (if missing) in the database.

Where can I get more information?

Microsoft Platform SDK – ICE79

ICE80

What does ICE80 check?

ICE80 validates that the value of the Template Summary Property (PID_TEMPLATE) correctly specifies "Intel64" or "Intel" depending on the presence of 64-bit components or custom action scripts.

ICE80 checks the Component Table for any 64-bit components and checks the CustomAction Table for any 64-bit scripts.

ICE80 verifies that a package with "Intel64" in its Template Summary Property also has a Page Count Summary Property (PID_PAGECOUNT) of at least 150 (i.e., Windows Installer version 1.1).

ICE80 also validates that the language ID specified by the ProductLanguage property must be contained in the Template Summary Property.

When does ICE80 show up?

• ICE80 posts error if a package contains 64 bit component but the Template Summary Property does not contain Intel64.

• ICE80 posts error if a package contains 64 bit custom action script but the Template Summary Property does not contain Intel64.

• ICE80 posts error if there is a bad value in Summary Information Stream.

• ICE80 posts error if a package is marked with Intel64 but it has a schema less than 150(i.e., Windows Installer version 1.1).

• ICE80 posts error if the package is 32-bit but it is using a 64-bit property.

• ICE80 posts error if the package is 32-bit but it is using 64 bit Locator Type in a RegLocator table entry.

• ICE80 posts error if a 64-bit component is using a 32-bit directory.

• ICE80 posts error if a 32-bit component is using a 64-bit directory.

• ICE80 posts error if the value of the ProductLanguage property is not listed in the Template Summary property.

How can I fix ICE80?

Based on the ICE80 error description, make the necessary modifications to appropriate tables.

Where can I get more information?

Microsoft Platform SDK – ICE80

ICE81

What does ICE81 check?

ICE81 validates the MsiDigitalCertificate table and MsiDigitalSignature table. This ICE custom action posts warnings for digital certificates that are unused or unreferenced, and it posts an error when the signed object does not exist or when the signed object's cabinet does not point to external data.

When does ICE81 show up?

• ICE81 posts warning if all or some Digital Certificate records are unused in the installation database.

• ICE81 posts error the Media table does not exist but MsiDigitalSignature has entries.

• ICE81 posts error if the Media table exists, but the entry in MsiDigitalSignature is not present in Media table.

• ICE81 posts error if a signed object's cabinet does not point to external data.

How can I fix ICE81?

• To fix ICE81 warning, add record(s) to MsiDigitalSignature table.

• If MsiDigitalSignature table has entries but the Media table does not exist, add the Media table to the package and add records to the Media table.

• If a signed object’s cabinet does not point to external data, update the cabinet so that it can point to an object outside the package.

Where can I get more information?

Microsoft Platform SDK – ICE81

ICE82

What does ICE82 check?

ICE82 validates that the RegisterProduct Action, RegisterUser Action, PublishProduct Action, and PublishFeatures Action are all present in the InstallExecuteSequence table. The package is validated if all the actions are present.

Note: Not having all these actions prevents the application from being listed in Add/Remove in the control panel and prevents the advertisement of the application. Removing all of these actions prevents the application from being registered with the Windows Installer configuration data. This means that you will no longer be able to remove, repair, or reinstall the application using the Windows Installer Command Line Options or the Windows Installer application programming interface.

When does ICE82 show up?

• ICE82 posts a warning if RegisterProduct Action, RegisterUser Action, PublishProduct Action, and PublishFeatures Action are absent in the package.

• ICE82 posts a warning if there are two actions with the same sequence number listed in the InstallExecuteSequence, InstallUISequence, AdminExecuteSequence, AdminUISequence, or AdvtExecuteSequence tables.

• ICE82 posts an error if some of the four actions (RegisterProduct Action, RegisterUser Action, PublishProduct Action, and PublishFeatures Action) are present and others are absent.

How can I fix ICE82?

• To fix ICE82 warning, add RegisterProduct, RegisterUser, PublishProduct, and PublishFeatures actions to InstallExecuteSequence table (if they are all missing). If the warning is due to a duplicate sequence number in a sequence table, update the sequence numbers.

• To fix ICE82 error, add the missing actions among RegisterProduct, RegisterUser, PublishProduct, and PublishFeatures actions to InstallExecuteSequence table.

Where can I get more information?

Microsoft Platform SDK – ICE82

ICE83

What does ICE83 check?

ICE83 validates the MsiAssembly table.

Note: The MsiAssembly table specifies Windows Installer settings for Microsoft .NET Framework assemblies and Win32 assemblies. If there is at least one entry in the MsiAssembly table, the InstallExecuteSequence table must contain the MsiPublishAssemblies action and MsiUnpublishAssemblies action.

This ICE custom action posts an error if the key path for a component containing a Win32 assembly is set to the manifest file. Explicitly the error is posted if the value entered in the KeyPath field of the Component table equals the value entered in the File_Manifest field of the MsiAssembly table. This ICE custom action posts an error if there is at least one record in the MsiAssembly table and the InstallExecuteSequence table does not contain both the MsiPublishAssemblies Action and MsiUnpublishAssemblies Action.

When does ICE83 show up?

• ICE83 posts an error when the KeyPath field for a Win32 Assembly is set to its manifest file.

• ICE83 posts an error when there is at least one entry in the MsiAssembly table but the InstallExecuteSequence table does not contain both the MsiAssemblyPublish action and the MsiAssemblyUnpublish action.

How can I fix ICE83?

• For a Win32 assembly, do not specify a manifest file as the component's key path file in the KeyPath field of the Component table.

• If there is at least one entry in the MsiAssembly table, make sure that the InstallExecuteSequence table contains the MsiPublishAssemblies action and MsiUnpublishAssemblies action.

Where can I get more information?

Microsoft Platform SDK – ICE83

ICE84

What does ICE84 check?

ICE84 checks the AdvtExecuteSequence table, AdminExecuteSequence table, and the InstallExecuteSequence table to verify that the following standard actions have not been set with conditions in the Condition field.

• CostInitialize action

• CostFinalize action

• FileCost action

• InstallValidate action

• InstallInitialize action

• InstallFinalize action

• ProcessComponents action

• PublishFeatures action

• PublishProduct action

• RegisterProduct action

• UnpublishFeatures action

If conditions are found, ICE84 posts a warning.

When does ICE84 show up?

ICE84 posts a warning if a required action has been authored with a condition.

How can I fix ICE84?

To fix ICE84, remove the conditions around required actions listed above.

Where can I get more information?

Microsoft Platform SDK – ICE84

ICE85

What does ICE85 check?

ICE85 validates that the SourceName column of the MoveFile table is a valid long file name. This field may contain wildcard characters (* and ?).

Note: MoveFile table contains a list of files to be moved or copied from a specified source directory to a specified destination directory.

When does ICE85 show up?

ICE85 posts an error if the SourceName field in the MoveFile table is not a valid long file name.

How can I fix ICE85?

To fix this error, change the value found in the SourceName field of MoveFile table to a valid file name.

Where can I get more information?

Microsoft Platform SDK – ICE85

ICE86

What does ICE86 check?

ICE86 issues a warning if the package uses the AdminUser property in database column of the Condition type. Package authors should use the Privileged property in conditional statements.

Note: The installer sets the AdminUser property on Windows NT/Windows 2000 if the user has administrator privileges. This property is always set on Windows 95 and Windows 98.

Note: The Privileged property indicates whether the installation is performed in the context of elevated privileges. The installer sets this property if the user has administrator privileges, if the application has been assigned by a system administrator, or if both the user and machine policies AlwaysInstallElevated are set to true.

When does ICE86 show up?

ICE86 posts a warning if AdminUser property was used in a Condition field.

How can I fix ICE86?

To fix this warning, replace AdminUser property with Priviliged property.

Note: The installer only sets the AdminUser property if the user is an administrator. The installer sets the Privileged property if the user is an administrator or if policy enables the user to install with elevated privileges.

Where can I get more information?

Microsoft Platform SDK – ICE86

ICE87

What does ICE87 check?

ICE87 validates that the following properties have not been authored in the Property Table. These properties should instead be set on a command line.

• ADDLOCAL property (The value of the ADDLOCAL property is a list of features delimited by commas that are to be installed locally.)

• REMOVE property (The value of the REMOVE property is a list of features delimited by commas that are to be removed.)

• ADDSOURCE property (The value of the ADDSOURCE property is a list of features delimited by commas that are to be installed to run from source.)

• ADDDEFAULT property (The value of the ADDDEFAULT property is a list of features delimited by commas that are to be installed in their default configuration.)

• REINSTALL property (The value of the REINSTALL property is a list of features delimited by commas that are to be reinstalled.)

• ADVERTISE property (The value of the ADVERTISE property is a list of features delimited by commas that are to be advertised.)

• COMPADDLOCAL property (The value of the COMPADDLOCAL property is a list of component GUIDs delimited by commas, that are to be installed locally.)

• COMPADDSOURCE property (The value of the COMPADDSOURCE property is a list of component GUIDs delimited by commas, that are to be installed to run from the source media.)

• FILEADDLOCAL property (The value of the FILEADDLOCAL property value is a list of file keys delimited by commas that are to be installed to run locally.)

• FILEADDSOURCE property (The value of the FILEADDSOURCE property denotes a list of file keys delimited by commas that are to be installed to run from the source media.)

• FILEADDDEFAULT property (The value of the FILEADDDEFAULT property is a list of file keys delimited by commas that are installed in their default configuration.)

When does ICE87 show up?

ICE87 posts a warning if one of the properties listed above is authored into the Property table. Doing so might cause the product to not be uninstalled correctly.

How can I fix ICE87?

To fix ICE87 warning, set the property on a command line instead of the Property table. For example, msiexec /I setup.msi ADDLOCAL=Feature1,Feature2

Where can I get more information?

Microsoft Platform SDK – ICE87

ICE88

What does ICE88 check?

ICE88 validates that the directory referenced in the DirProperty column of the IniFile table exists in the Windows Installer package.

ICE88 issues a warning if the DirProperty value does not represent a property in the Directory, AppSearch, or Property tables, certain system folder properties, or a property set by a type 51 custom action.

ICE88 scans the following tables and properties:

• Directory Table

• AppSearch Table

• Property Table

• CustomAction Table, where the custom action is a Custom Action Type 51 (i.e., Set Property)

• ProgramFilesFolder Property

• CommonFilesFolder Property

• SystemFolder Property

• ProgramFiles64Folder Property

• CommonFiles64Folder Property

• System64Folder Property

When does ICE88 show up?

ICE88 posts a warning if a directory property referenced in the DirProperty column of the IniFile table does not exist in the installer package.

How can I fix ICE88?

To fix ICE88 warning, make the directory property referenced in the DirProperty column of the IniFile table available by means of one of the alternative methods listed above.

Where can I get more information?

Microsoft Platform SDK – ICE88

ICE89

What does ICE89 check?

ICE89 validates that the value in the Progid_Parent column in ProgId table is a valid foreign key into the ProgId column in ProgId table. Every ProgId parent should have a record in the ProgId table.

Note: The ProgId table contains information for program IDs and version independent program IDs that must be generated as a part of the product advertisement.

When does ICE89 show up?

ICE89 posts an error if a ProgId_Parent value in the ProgId table is not a valid ProgId.

How can I fix ICE89?

To fix ICE89 error, add a new record for the parent ProgId in the ProgId table.

Where can I get more information?

Microsoft Platform SDK – ICE89

ICE90

What does ICE90 check?

ICE90 validates the Shortcut table and uses the Directory table. It checks if a shortcut’s directory is specified as a public property and is under user profile directory.

The names of Public Properties are written in uppercase letters. A shortcut specified by a public property may not work if the value of the ALLUSERS property changes in the UI sequence.

Note: The ALLUSERS property determines where the configuration information of the installed application is stored (per-user versus per-machine). If ALLUSERS is not set, the installer does a per-user installation.

When does ICE90 show up?

ICE90 posts a warning if it finds that a shortcut's directory has been specified as a public property and is under user profile directory.

How can I fix ICE90?

To fix this warning, change your property name to become a private property (i.e., use at least one lowercase letter in the name). If a private property is used, you should NOT give any “Select Shortcut Folder” or “Program Group” type of option on the user interface of your installer.

Note: On Windows XP, Windows 2000, and Windows NT, you cannot set a private property in the user interface phase of the installation and then pass the value to the execution phase. On earlier systems, this is possible because the user interface and execution sequences run in the same process.

Where can I get more information?

Microsoft Platform SDK – ICE90

ICE91

What does ICE91 check?

ICE91 checks if a file, .ini file, or shortcut file is installed into a per-user only directory. ICE91 warnings are harmless if the package is only used for per-user installations and never used for per-machine installations.

Files, .ini files, or shortcuts in per-user only directories are installed into a particular user's profile. Even if the user sets the ALLUSERS property for a per-machine installation, files, .ini files, or shortcuts in per-user only directories are not copied in to the "All Users" profile and are not available to other users. The per-user only directories do not vary with the ALLUSERS property. The following is a list of the per-user only directories:

• AppDataFolder

• FavoritesFolder

• NetHoodFolder

• PersonalFolder

• PrintHoodFolder

• RecentFolder

• SendToFolder

• MyPicturesFolder

• LocalAppDataFolder

Note: The ALLUSERS property determines where the configuration information of the installed application is stored (per-user versus per-machine). If ALLUSERS is not set, the installer does a per-user installation.

If a file or .ini file, or shortcut is set to be installed to the per user directory that doesn't vary based on ALLUSERS value, this specific resource won't be copied to each user's profile even if a per machine installation is desired.

When does ICE91 show up?

ICE91 posts a warning if a file, .ini file, or shortcut file is installed into a per-user only directory.

If a file or .ini file, or shortcut is set to be installed to the per user directory that doesn't vary based on ALLUSERS value, this specific resource won't be copied to each user's profile even if a per machine installation is desired.

How can I fix ICE91?

ICE 91 warning message means that the MSI will only install the resource into the user profile for the user account that executes the MSI, but not for any other user accounts on the same machine.

As far as the application functionality is concerned, check to see if it is a necessity that the resource be copied into each user’s profile for correct functionality of the application or not. If the resource does not need to be in the user profile to work (i.e., it might work in a folder under All Users profile) then install it to a folder under All Users profile.

If the resource must be copied to each user’s profile, then add functionality to your package to do this. To achieve this, add a current user registry key (i.e., just a dummy registry key) and make this registry key the key path of the component which contains the resource. This means that the resource will be copied to the next user’s profile as part of the MSI self healing mechanism, provided that advertised entry points exist for the product.

Where can I get more information?

Microsoft Platform SDK – ICE91

ICE92

What does ICE92 check?

ICE92 verifies that a component without a Component Id GUID is not also specified as a permanent component.

ICE92 checks the Component Table for components without a GUID specified in the ComponentId field and verifies that they are not specified as permanent components. Permanent components are left behind after uninstalling the application.

If the ComponentId column is null, the installer does not register the component and the component cannot be removed or repaired by the installer.

When does ICE92 show up?

ICE92 posts error if a component has no ComponentId and is marked as permanent.

How can I fix ICE92?

To fix ICE92, assign a GUID to the component or remove the permanent mark from the component.

Where can I get more information?

Microsoft Platform SDK – ICE92

ICE93

What does ICE93 check?

ICE93 checks if a custom action uses the same name as a standard action.

When does ICE93 show up?

ICE93 issues a warning if a custom action uses the same name as a standard action.

How can I fix ICE93?

To fix ICE93, rename your custom action to a name other than standard action names.

Where can I get more information?

Microsoft Platform SDK – ICE93

ICE94

What does ICE94 check?

ICE94 checks the Shortcut table, Feature table, and MsiAssembly table and posts a warning if there are any unadvertised shortcuts pointing to an assembly file in the global assembly cache.

When does ICE94 show up?

ICE94 posts a warning if there are any unadvertised shortcuts pointing to an assembly file in the global assembly cache.

How can I fix ICE94?

To fix ICE94, make the shortcut advertised.

Note: If the entry in the Target field of the Shortcut table is not a feature in the Feature table, the shortcut is unadvertised. If the entry in the Component_ field of the Shortcut table is also listed in the MsiAssembly table, the shortcut points to an assembly file. If the entry in the File_Application field in the MsiAssembly table is empty, the assembly file is in the global assembly cache.

Where can I get more information?

Microsoft Platform SDK – ICE94

ICE95

What does ICE95 check?

ICE95 checks the Control table and BBControl table to verify that the billboard controls fit onto all the billboards.

Note: The BBControl table lists the controls to be displayed on each billboard. The Control table defines the controls that appear on each dialog box.

When does ICE95 show up?

ICE95 posts a warning if a billboard control does not fit on a billboard.

How can I fix ICE95?

To fix ICE95, resize and/or reposition the billboard to fit on the billboard.

Where can I get more information?

Microsoft Platform SDK – ICE95

ICE96

What does ICE96 check?

ICE96 verifies that the PublishFeatures action and the PublishProduct action are entered in the AdvtExecuteSequence table. A package cannot be advertised without these actions.

Note: The PublishFeatures action writes each feature's state into the system registry.

Note: The PublishProduct action manages the advertisement of the product information with the system. It publishes the product if the product is in advertise mode or if any feature is being installed or reinstalled.

When does ICE96 show up?

ICE96 posts a warning if PublishFeatures and/or PublishProduct actions are not specified in the advertising sequence table (i.e., AdvtExecuteSequence).

How can I fix ICE96?

To fix ICE96, add PublishFeatures and/or PublishProduct standard actions to AdvtExecuteSequence table.

Where can I get more information?

Microsoft Platform SDK – ICE96

ICE97

ICE97 verifies that two components do not isolate a shared component to the same directory.

Result

ICE97 posts the following warnings.

ICE97 Warning Description

This component [1] installs the Shared component into the same directory [2] as another, which breaks component rules if both (or more) components are selected for install. Two components must not isolate a shared component to the same directory.

For example, Component1 and Component2, which share ComponentShared, are installed to the same directory. Both specify ComponentShared as an isolated component. Because of the isolation, the files in ComponentShared are copied twice into the Directory_ reference for Component1 and Component2. The components now have one reference count on the copy of files. This is in violation of the Installer component rules. If Component1 is uninstalled, the isolated components files are removed and Component2 is broken.

ICE98

What does ICE98 check?

ICE98 verifies that data source names (DSN) that use the ODBCDataSource Table do not contain invalid characters and do not exceed the maximum length of SQL_MAX_DSN_LENGTH (32 characters).

When does ICE98 show up?

ICE98 posts a warning if a data source name contains invalid characters or exceeds the maximum limit of 32 characters.

How can I fix ICE98?

To fix ICE98, use a valid data source name which is less than 32 characters.

Where can I get more information?

Microsoft Platform SDK – ICE98

ICE99

What does ICE99 check?

ICE99 verifies that that no property name entered in the Directory table duplicates a name reserved for the public or private use of the Windows Installer.

When does ICE99 show up?

ICE99 posts a warning if a directory name used in the package is the same as one of the MSI Public Properties.

How can I fix ICE99?

To fix ICE99 warning, change the value in the Directory column of the Directory table so that it does not duplicate a property name reserved by the Windows Installer.

Where can I get more information?

Microsoft Platform SDK – ICE99


Comments

  • Thanx for such a well detailed blog....it has helped me a lot in understanding ICE errors and how to fix it... :D - akki 11 years ago
    • No Issues Akki....I know the pain people go through to resolve ICE... - RJ 11 years ago
  • There is NO way those Tshirts are still around. I was given one of those in 2000. Unless someone else is reusing the 'humour'..... - Badger 9 years ago
This post is locked

Don't be a Stranger!

Sign up today to participate, stay informed, earn points and establish a reputation for yourself!

Sign up! or login

Share

 
This website uses cookies. By continuing to use this site and/or clicking the "Accept" button you are providing consent Quest Software and its affiliates do NOT sell the Personal Data you provide to us either when you register on our websites or when you do business with us. For more information about our Privacy Policy and our data protection efforts, please visit GDPR-HQ