Problem with RSA KBE?
We recently installed a Kace RSA running on VMWare vSphere.
We were able to link to our main KBox 2000 with no issues.
We were using the driver feed workaround, and ran the driver feed syncronizer to sync those driver between the KBox 2000 and the RSA.
We have a scripted Windows 7 image that works fine on the Kbox, but not when deploying from the RSA.
PXE boot works fine - we choose our default KBE.
It loads the KBE iso. It starts running the scripts.
Maps drives to the RSA, then gets to the mshta y:rpc_upload_inventory.hta and hangs.
We see the white screen that says "Logging into server..." and eventually it times out. (During the Launching Deployment client.) and says "An error occured while contacting the server.".
Any ideas?
Thanks
Dave
We were able to link to our main KBox 2000 with no issues.
We were using the driver feed workaround, and ran the driver feed syncronizer to sync those driver between the KBox 2000 and the RSA.
We have a scripted Windows 7 image that works fine on the Kbox, but not when deploying from the RSA.
PXE boot works fine - we choose our default KBE.
It loads the KBE iso. It starts running the scripts.
Maps drives to the RSA, then gets to the mshta y:rpc_upload_inventory.hta and hangs.
We see the white screen that says "Logging into server..." and eventually it times out. (During the Launching Deployment client.) and says "An error occured while contacting the server.".
Any ideas?
Thanks
Dave
0 Comments
[ + ] Show comments
Answers (5)
Please log in to answer
Posted by:
Finire
10 years ago
I have run into a very similar issue to this. Specifically with the Dell e6420. With the e6420, it was a matter of updating the BIOS as it had some issues with the A06 bios booting PXE.
Best bet, check and see if there are known issues, and try upgrading the BIOS.
Posted by:
dmontgomery
12 years ago
Any thoughts or suggestions on this? Has anyone run across anything similar?
Thanks,
Dave
Thanks,
Dave
Comments:
-
Were you able to resolve this? I am getting the same error, but only on my x86 KBE. - joe.pyrczak 10 years ago
-
Our issue was tied to the way the RSA's push out and communicate back to the primary server. In order to push out anything from a Kace RSA, the client must do an "inventory upload" not to the RSA, but to the "home" Kace server. I'm sure this is done for licensing reasons, but it does restrict the functionality of the RSA's a bit. We work in very remote areas, and it's not always feasible for us to get Internet/VPN access set up first, but it's what we're currently working with. - dmontgomery 10 years ago
Posted by:
rmeyer
12 years ago
Can you access the main K2000 server from that network ?
It's uploading the inventory to that as far as I understand, so that could be the problem I guess.
I haven't heard about the problem before though
It's uploading the inventory to that as far as I understand, so that could be the problem I guess.
I haven't heard about the problem before though
Posted by:
dmontgomery
12 years ago
That's what Kace support may be indicating as well.
We are trying to have a portable Kace RSA that we can take to a remote site and use to deploy our systems before connectivity is established via VPN back to our main office. So in testing we have been getting everything in sync between the K2000 and RSA, turning on the DHCP, and removing from our network and doing isolated testing for just the RSA and the desired client.
It seems like Kace might not be able to do what we're looking for in this instance. :/
Dave
We are trying to have a portable Kace RSA that we can take to a remote site and use to deploy our systems before connectivity is established via VPN back to our main office. So in testing we have been getting everything in sync between the K2000 and RSA, turning on the DHCP, and removing from our network and doing isolated testing for just the RSA and the desired client.
It seems like Kace might not be able to do what we're looking for in this instance. :/
Dave
Posted by:
cserrins
12 years ago
Often this either not enough memory on the computer, or a nic driver conflict (same nic in kbe multiple times).
Rating comments in this legacy AppDeploy message board thread won't reorder them,so that the conversation will remain readable.